Lap siding typically comes in a variety of sizes. The most common sizes range from 3/8 inch grooves up to 7/8 inch grooves, with nominal widths ranging from 4 or 5 inches to 12 inches. Different manufacturers may offer wider widths, such as an 8 inch or 14 inch lap siding.
The length of the lap siding will vary depending on the manufacturer and the type of siding you are using, but most commonly come in 12, 16, and even 20-foot lengths. Keep in mind that some manufacturers may offer lap siding in other sizes than what is most common, so it’s important to know exactly what size you are looking for before making a purchase.
How wide is Hardie board trim?
Hardie board trim typically comes in widths of 1/2 inch, 5/8 inch and 7/8 inch. The placement of the trim affects the required width of the board, with wider trim used on outside corners and along eave edges, and narrower trim used at edges and along inside corners.
Manufacturers often provide consistent widths for lines of finishing boards, so it’s important to use the same width for any design to ensure the finished product has a cohesive, finished look.
How much does it cost to put Hardie board on a 1500 square foot house?
The cost of putting Hardie board on a 1500 square foot house will depend on a variety of factors including the exact size, type and style of the Hardie board, the number of labor hours required to install it, the complexity of the job, any additional conditions or requirements, and the price of materials and labor in your region.
The cost also depends on whether you are using a professional contractor or doing the job yourself, since DIY jobs can help you save money. On average, it may cost between $6,000 and $15,000 to put Hardie board on a 1500 square foot house.
This cost includes the materials and labor, and the amount can vary depending on the complexity of the project. For example, if there are areas that require staining or painting, this can add to the cost.
Generally, Hardie board installation is considered to be a specialty job that requires special tools and equipment, so it is recommended to hire a contractor rather than doing it yourself.
Does Hardie board come in 4×9 sheets?
Yes, Hardie board does come in 4×9 sheets. Hardie board is a type of fiber cement siding that is extremely durable and long-lasting. It is known to be resistant to fire and moisture, and is also bug, rot, and hail-proof! The 4×9 sheets of Hardie board come in various thicknesses, depending on the application.
When having these sheets cut and installed, it is important to follow the instructions exactly as given by the manufacturer, as incorrect cutting or installation can lead to weakening of the boards.
How much is a sheet of Hardie board?
The cost of a sheet of Hardie board depends on several factors, including the size of the sheet, its thickness, the finish and the retailer where you purchase it. Generally, you can expect to pay around $6 to $13 per square foot for Hardie board siding, ranging from $9 to $20 per square foot installed.
For example, a 24-inch by 96-inch sheet of 5/16-inch Hardie board costs around $25 each, while a 48-inch by 120-inch sheet of 1/2-inch Hardie board costs around $55 each. Prices may vary based on location and the retailer you purchase from, so be sure to shop around and compare prices.
What size does Hardie board and batten come in?
Hardie board and batten is a siding product that can give any house a classic, rustic look. The boards come in a wide range of sizes, depending on the manufacturer. Generally, Hardie board and batten is available in widths ranging from 4 to 12 inches, with lengths in four-foot increments starting at 8 feet.
Additionally, it comes in a variety of thicknesses to suit different weather conditions and applications. Customers looking to utilize Hardie board and batten typically select their desired size, thickness, and color of the material, with special orders available if needed.
Installation is relatively easy, making it a great option for DIYers and professional siding installers alike.
How do you install Hardie 4×8 sheets?
Installing Hardie 4 x 8 sheets is a job that can be done by either a DIYer or a professional. If you decide to tackle the job yourself, here are the steps you’ll need to take:
1. Measure the wall area where the sheets will be attached. Make sure to measure twice to ensure accuracy.
2. Purchase the needed supplies based on the measurements taken. You’ll need a drill, screws, nails, and Hardie 4 x 8 sheets.
3. Cut the Hardie 4 x 8 sheets to the desired size and shape, taking care to wear safety glasses when doing so.
4. Use the drill to create pilot holes. The holes should be slightly deeper than the screws that are used to allow the screws to go in flush with the Hardie sheet’s edge.
5. Insert the screws or nails into the pilot holes. Make sure that the screws or nails are inserted at an angle, so that when the screws are tightened, the Hardie sheet is pulled in snugly.
6. Use a level to make sure that the edges of the Hardie sheet are level.
7. Finally, caulk along the seams and edges to ensure a tight seal and an airtight fit.
Following these steps should ensure that your Hardie 4 x 8 sheets are installed correctly and securely. However, if you’re not comfortable with taking on this task yourself, it’s best to hire a professional contractor to do the job.
How many pieces of Hardie siding are in a 8.25 pallet?
It is difficult to determine the exact number of Hardie siding pieces in an 8.25 pallet, as the size and material vary based on the siding being ordered. However, as a general estimate, one pallet of Hardie siding contains approximately 56 pieces of 4 by 8 foot siding.
This would equate to approximately 110 pieces of 4 by 9 foot siding or up to 102 pieces of 4 by 10 foot siding. Of course, depending on the variation of material, the exact quantity of pieces included in the pallet may be more or less than mentioned above.
What trim to use with hardiplank?
When installing Hardiplank, it’s important to choose the right trim. Hardiplank trim should be composed of aluminum or vinyl, as these materials are better able to withstand the elements than wood trim.
If a wood trim is desired, cedar should be chosen because it is an extremely durable wood species.
For exterior Hardiplank applications, aluminum coil trim is ideal, as it can be formed to fit a variety of windows, doors, and other details. For corners and joints, aluminum coil stock with a wood grain finish can be added to create the appearance of wood trim.
Inside the home, vinyl trim is a great option, as it is available in various styles and colors and offers a cost-effective option for trimming out Hardiplank projects.
When installing any type of trim with Hardiplank, it is important to make sure that the trim pieces are secure and sealed. Properly applied caulking should always be used at the joints, and any secure fasteners should be of the correct type and size.
This will ensure that your Hardiplank trim is able to withstand the elements for many years to come.
Is Hardie discontinuing trim?
No, Hardie is not discontinuing trim. Hardie siding and trim are part of the company’s long history of providing quality exterior home solutions, and they remain committed to offering the best products for their customers.
Hardie offers a full line of trim products including lap, corner, fascia, rake, band board, j-channel, and more, so homeowners can match their trim needs to the look and feel of their existing siding.
Furthermore, Hardie’s trim products are engineered to resist cracking, warping, and discoloration, helping to ensure that your home’s exterior looks great for years to come. Hardie’s customer service teams are also on hand to answer any questions and to suggest the best choices for homeowners.
How far apart should batten strips be?
Batten strips are boards used to secure roofing material to rafters, and the spacing between each batten strip is dependent on the roofing material used. Generally speaking, for roofing material such as asphalt shingles, the strips should be installed 16 inches apart from each other when parallel to the roof’s ridge line.
If the lines of the roofing material run perpendicular to the ridge, the strips should be placed 24 inches apart from each other. When installing cedar shingles, the spacing should be between 6 and 9 inches apart.
And when installing aluminum, steel, or zinc panels, the strips should be 8-12 inches apart from each other. Additionally, the batten strips should come at least 5 inches away from any chimney, vent, dome, or hip.
All of the batten strips should be measure, cut, and nailed with precision before installing to ensure secure attachment of the roofing material.
How far apart should boards be for board and batten?
When creating board and batten siding, the boards should be spaced 1-2 inches apart. The exact spacing depends on the overlap of the boards and the size of boards used. For smaller boards with a higher overlap, the spacing should be closer to 1 inch, while for larger boards with lower overlap, the spacing should be closer to 2 inches.
One important thing to remember is that the spacing should not vary more than ¼ inch from board to board. To ensure even spacing, you can use chalk lines to create a guide for nailing the boards. Additionally, you should also take into account any additional trim pieces and make sure their edges align with the edges of the boards.
Is board and batten the same as Hardie board?
No, board and batten is not the same as Hardie board. Board and batten is a type of wainscoting which consists of wide, flat boards that are installed vertically in alternating lengths (usually wider at the bottom than at the top).
Hardie board is a type of fiber cement siding manufactured by James Hardie that is made of a mix of Portland cement, sand, and cellulose fibers. Hardie board is installed horizontally and is therefore much thicker and heavier than traditional vinyl siding.
While both products are used for sidings, they have different applications, uses, and benefits.
How many types of Hardie board are there?
There are two main types of Hardie board: HardiePlank siding and HardiePanel vertical siding. HardiePlank siding is the most popular siding option, and is available in a variety of widths, colors, and textures.
It also has a variety of trim options to complete the look of any home. HardiePanel vertical siding is a wider option that is available in the same range of colors, textures, and widths as the HardiePlank siding.
It offers the appearance of board-and-batten style or stucco-style siding. HardiePanel vertical siding is best for homes that have a more diverse and complex architecture, or where weather protection needs to extend further up the wall.
As two of the most durable and weather-resistant siding options, HardiePlank and HardiePanel siding are a major upgrade to any home.
What are the 3 major types of board siding?
The three major types of board siding are wood, vinyl, and fiber-cement.
Wood siding has been around for centuries, but it requires regular maintenance and can be notoriously difficult to install. If the initial investment isn’t a concern, though, wood siding can offer a classic, traditional aesthetic to the home that can last a long time.
Vinyl siding is one of the cheapest and easiest ways to achieve a modern look. It’s usually much lighter than wood siding, and resists rot and weathering. However, it’s not as durable as other types of siding and can be prone to denting and scratching.
Fiber-cement siding is becoming increasingly popular due to its ability to mimic the look of wood and its durability. It’s much harder to dent and scratch than vinyl siding and it’s also fire-resistant.
Its installation is more labor intensive than other types of siding, but it can offer an attractive, classic look that can last for years with little maintenance.
Is there a difference between Hardie board and Hardie plank?
Yes, there is a difference between Hardie board and Hardie plank. Hardie board is a form of cement board that is manufactured from cement fibers, sand, and water. It is used primarily for tile and stone applications and is designed to resist cracking, rotting, and swelling due to moisture.
Hardie board comes in various thicknesses, ranging from 1/4″ to 1/2″. It can also be cut to fit different sizes.
Hardie plank, on the other hand, is a specific siding product that is manufactured by James Hardie. It is a type of exterior cladding, and is often referred to as ‘fiber cement siding’. Hardie plank is made of cement, sand, and cellulose, and is designed to be incredibly durable and resistant to impact, fire, decay, fungus, and pests.
As compared to Hardie board, the Hardie plank is much thinner, coming in at only 5/16″ in thickness. It also comes in various sizes and shapes to suit various construction needs.
How often does Hardie board need painting?
Hardie board is a type of fiber cement siding that is designed to be more durable and weather-resistant than regular wood and vinyl siding. Hardie board has a unique formulation that makes it more resistant to damage from pests and rot, as well as reduced fading from exposure to the elements.
As a result, it does not need to be painted as often as other types of siding. Depending on the color and finish you choose, Hardie board may only need to be painted every 10-15 years, making it a great long-term investment for your home.
Additionally, Hardie board is available in a variety of colors, finishes, and textures, so you can customize your home to match your desired aesthetic.
How much does it cost to side a house with Hardie Plank?
The overall cost to side a house with Hardie Plank will depend greatly on the complexity of the project, the square footage of the home, and any additional features such as trim, soffits, or gutters.
Generally speaking, the national average to have a house sided with Hardie Plank is anywhere from $8,260 to $15,452. This range includes the cost for material and installation.
Material costs for Hardie Plank siding vary based on the design of the plank chosen, the quantity and quality of the material used, and other additional features. Generally speaking, the cost of the material alone is between $0.
75 and $11 per square foot. Installation costs are usually calculated as a flat hourly rate; however will depend greatly on the size and complexity of the project. On average, installation costs are $3.
50 to $8 per square foot.
When considering the overall cost to side a house with Hardie Plank, other important factors to consider include the cost of labour, painting costs (if desired), and any trim or additional features such as soffits or gutters.
It is prudent to research the cost for each of these items/services prior to beginning your project.
How wide should siding be?
The width of siding is largely dependent on the look you are trying to achieve for your home exterior. For traditional, classic styling, it is common to have siding that is 8 to 12 inches wide. Other options for wider siding range from 16 to 18 inches in width.
Choosing wider panels can create an interesting shadow line across the home and make it stand out from the rest. Conversely, narrower siding boards can create a nice, staggered look, which works especially well for Tudor or Cape Cod-style homes.
Ultimately, the choice will come down to personal preference, as well as the specific siding materials that you choose.