The best place to put knobs on kitchen cabinets is at the center of each door or drawer. This allows for easy access to the contents of the cabinets. It is also more visually appealing than having knobs placed off-center.
To determine the proper placement of knobs, it is important to measure the space between the two doors or drawers, as well as the thickness of the doors or drawers. If the doors or drawers on either side of the knob are of different widths or thicknesses, then the knob should be placed in the middle of the thicker or wider door/drawer.
For drawers, the knob should be placed in the center of the upper half of the drawer. Once the knob is in place, it should be approximately two inches from the edge of the door/drawer.
Where do you place a kitchen door knob?
The proper placement of a kitchen door knob is determined by the type of knob or handle you purchase and the type of door you are using. Generally speaking, the knob or handle should be placed somewhere between 30-38 inches from the bottom of the door.
It’s important to mount the knob or handle in an accessible spot that is comfortable for you to use. If the door is slightly wider than usual, then you may want to set the handle further up the door to avoid awkwardly having to lean over it to reach the door knob.
If there is not a standard knob used, you may want to measure the knobs you are considering prior to purchase. Be sure to avoid mounting the knob near a corner of the door opening near the adjacent walls.
This could cause the door to be too close to the wall when it is opened, making it difficult to pass through the doorway.
What is the rule of thumb for cabinet hardware?
The rule of thumb for cabinet hardware is to choose hardware that complements the style of the cabinets. For example, if you have sleek and modern cabinets, go for minimal and contemporary hardware. If you have classic, traditional cabinets, pick timeless, classic hardware.
It is also important to pick hardware that is easy to grip if it is a location such as a cabinet door where you will be opening and closing it frequently. Finally, it is important to make sure that the hardware is made of high-quality materials and will be able to stand up to everyday wear and tear.
Can you mix pulls and knobs on cabinets?
Yes, you can mix pulls and knobs on cabinets as long as the style and finishes of each complement each other. If you are mixing pulls and knobs for a classic, traditional look, look for pieces with a similar shape and finish, such as round or oval shapes.
You can also mix metals—try mixing brass pulls and nickel knobs, or vice versa. For modern or contemporary looks, you can go bolder with the hardware. Mix shapes and finishes, such as long, slim pulls and circular knobs, in different metals or colors.
You can also mix geometrical shapes (squares, triangles, rectangles, etc. ) and contrasting finishes. Just be sure to keep balance in mind and the sizes proportionate in relation to the width and height of your cabinets for a cohesive look.
Should cabinet pulls be horizontal or vertical?
It depends on the type of cabinets you have and your own personal preference. For cabinets with a traditional look, horizontal pulls are usually more suitable, as this style has a more classic feel. Vertical pulls can work for a more contemporary feel, especially for tall cabinets or when you want to make a bolder statement.
However, regardless of the cabinet type, the key factor should always be ease of use. You don’t want the pulls to be in the way, so positioning them either horizontally or vertically should be based on the most practical layout.
Finally, make sure you measure the size and placement of your cabinet before deciding on the orientation of the pulls.
Do you put pulls on false drawers?
No, you don’t put pulls on false drawers. False drawers are non-functional, designed to give the look of having functioning drawers without actually having them. False drawers are usually used to add style or decoration to a piece of furniture, and since their function is only visual, there’s really no need to add pulls to these drawers.
Additionally, adding pulls to non-functional drawers can make the piece of furniture look cluttered and take away from the look you are trying to create.
What hardware looks with white cabinets?
When choosing hardware for white cabinets, it is important to keep in mind how the hardware can add to the overall look of the cabinets. For white cabinets, many people opt for hardware that is a little more subtle, such as brushed nickel, chrome or pewter.
These colors won’t create too much contrast or really pop out against the white, but will provide a nice clean look. Oil-rubbed bronze hardware can also work nicely with white cabinets if you want a little more contrast, as can black hardware.
When choosing hardware for white cabinets, you can also consider the style of hardware you’d like to keep consistent throughout the kitchen. Some popular options include bar pulls, cup pulls, knobs, and cabinet handles.
Each option can add a unique look to your kitchen and can be easily mixed and matched. Finally, you may also want to consider a few fun and unique hardware pieces to add personality to your kitchen. Some options include vintage-style pieces, painted hardware, and textured hardware.
It can be a fun way to add a little interest to the design.
How big should knobs be on cabinets?
When it comes to selecting knobs for cabinets, size is an important factor to consider. Generally, knobs should measure about 1.5 to 2.5 inches in diameter––any larger and the knobs can appear too prominent, while any smaller and they can be difficult to use.
However, depending on the size and design of your cabinets, you may want to go a bit bigger or smaller.
For those with larger cabinets, selecting a bigger knob may be beneficial. For example, a 3-inch knob can be a better choice because it is easier to grab and use. On the other hand, when choosing knobs for smaller cabinets, select something smaller.
Knobs that measure 1.25 to 1.75 inches in diameter can help emphasize the look of the cabinets, while also creating a better user experience.
In general, when selecting knobs for cabinets, go with what looks good to you. Make sure the knobs are big enough to be easily used, and small enough to not appear overly prominent. Then, find something that fits the overall look and style you desire.
What size pulls for 36 inch drawers?
For a standard 36 inch drawer, pulls should be sized in proportion to the width of the drawer, with a center mounted pull measuring either 3”, 4” or 6”. 3” pulls are often chosen for narrower drawers, while 4” to 6” pulls are used for wider drawers.
If the drawers have a curved or detailed front, then the pull may typically be larger — around 8” or larger — to draw the eye to the detail. When selecting pulls for a project, remember to match the style, finish, and proportion of the pull to the style of the cabinet and look of the entire room.
Can you mix knobs and pulls in a kitchen?
Yes, you can mix knobs and pulls in a kitchen. When it comes to the kitchen, there are no hard and fast rules that limit you to one style of knob or pull, so feel free to get creative with the combinations.
Some designers will use a mix of traditional round knobs for cabinets and drawers, along with cup pulls on base and wall units to create an eclectic and stylish look. Knobs and pulls can vary in finishes and metals, so think what mood and look you are going for and then mix or match to achieve it.
Another popular and effective way to mix knobs and pulls is by using them on a single door or drawer. You might want to alternate a large pull at the top with a smaller knob at the bottom, or the reverse, depending on the overall look you’re going for.
Ultimately, you should experiment and have fun creating your own unique design.
Does cabinet hardware have to match faucet?
Generally, cabinet hardware and faucets don’t have to match. That said, there are definitely situations where it enhances the look of the space to make sure they coordinate. Consider using the same finish in both the faucet and cabinet hardware to bring the two elements together, like gold or silver.
Additionally, if you’re looking to create an eclectic space or mix metallic finishes, then consider this an opportunity to experiment and make an intentional statement. Ultimately, the choice is yours to make and there are no hard and fast rules when it comes to designing your space.
Where should handles go on drawers?
The placement of handles on drawers will depend on the design of the drawers, as well as personal preference. Generally, handles should be placed in the center of drawers, horizontally or vertically.
This makes it easier to access the contents of the drawers. However, some designs might work better with handles placed closer to the top or bottom of drawers. The type of handles used will also determine where they should be placed.
For example, if handles are made as one-piece pulls, then they should be placed symmetrically on each side of the drawer. Alternatively, two-piece pulls will usually look better when slightly offset.
Once you have determined the placement of the handles, you should make sure that they are properly attached by predrilling the holes before installing the screws.
Should drawer knobs be centered?
Generally, drawer knobs should be centered for a uniform and aesthetically pleasing look. This is especially true in a kitchen with custom cabinetry. Centering drawer knobs also make it easier for people to open and close them.
When placed in the center of the drawer, the knobs are in reach from either side of the drawer and easier to grab. Additionally, most drawer knobs come with screws and the manufacturer may have designed them to be used in the center position only for stability and balance.
Place drawer knobs in the center of the drawer for an even and balanced look.
What is the standard size for cabinet pulls?
When considering the standard size for cabinet pulls, there is no definitive answer as size will depend on the size of the cabinet, the style of pull being used, and personal preference. Generally, pulls that are 3-3/4″ to 4-1/4″ center-to-center are considered to be standard, although smaller and larger sizes may be used to achieve a specific look or fit a certain cabinet opening.
When in doubt, it is usually best to measure the distance between the holes of the existing pulls to get an exact measurement or visit your local hardware store for assistance. Additionally, it is important to select pulls that suit the style of the room, such as a classic look versus a more contemporary design.