The reset button on the Blink module is located on the back of the device, above the USB Type-C port. It is a small recessed button, so you may need a thin implement like a paperclip or pin to press it.
Pressing the reset button initiates a software reset, which resets all of the Blink settings to their factory defaults. This can be useful if you want to restore the settings that were on your Blink module before you made any changes, such as when you are troubleshooting an issue.
It can also be used to factory reset a Blink system if it’s not working properly.
How do I get my sync module back online?
If your sync module is not responding, here are a few steps you can take to get it back online:
1. First, check to make sure the sync module is securely connected to a power source and is turned on.
2. Make sure to check the connection cables between your sync module and your system. Ensure they are securely plugged in and aren’t loose or frayed.
3. Check that your internet connection is active by connecting a device to your network and seeing if it can successfully load a website.
4. If everything looks good, try rebooting your sync module by unplugging the power cable, waiting 30 seconds, and then plugging it in again.
5. If no progress has been made, try resetting the sync module to its factory settings, which can be done either through the module’s user interface, or by pressing and holding the reset button for about 7 seconds (only do this as a last resort).
6. Once the module has been reset, redo the necessary set up procedure for the sync module and attempt to connect to the network again.
By trying the steps outlined above, you should be able to get your sync module back online. If all of these attempts fail, then there may be a hardware issue with the sync module itself, and it should be serviced or replaced.
Why is my Blink Sync module not connecting?
First, make sure there’s no interference from other Wi-Fi networks or devices near your Sync Module. Try powering down any other wireless networks and devices in your home and restarting your Sync Module.
Another cause of poor connection may be a congested Wi-Fi network. If your router is shared with other devices or processes, it may be slowing down your connection. If this is the case, try moving your Sync Module closer to your router.
You can also try changing your router’s channel or frequency. If your router is on an unusually busy channel or frequency, it may be having difficulty connecting. To do this, you’ll need to access your router through either a computer or a mobile app.
It’s also possible that you need to upgrade your router’s firmware. You can do this through your router’s settings section. It may be worth checking with your internet provider too, since they may be able to provide an upgrade or patch to keep your router up-to-date.
Finally, check to see if your Sync Module is in good condition. Make sure its power light is on and that its connection light is blinking slowly. If it’s working normally, then you should consider resetting your router and router/Sync Module connection.
If none of these steps resolve your problem, then it may be best to contact Blink Support for further assistance.
What happens if I delete my sync module?
If you delete your sync module, it will remove any data that your module has synced with other devices or accounts. This means that any data or settings you have saved on the module will be lost, such as saved Wi-Fi passwords, contacts, and calendars.
In addition, any files that have been shared through the module, such as images and videos, will no longer be available to you. It is important to note that deleting your sync module cannot be undone, and the data cannot be recovered.
Therefore, backup any information you want to keep before deleting your sync module.
Can I delete my Blink account and start over?
Yes, you can delete your Blink account and start over if you need to. Before deleting your account, however, you should make sure you have saved all of the content you want to keep. Once you delete your account, it will be permanently deleted and all of your data will be removed from Blink’s systems.
If you are sure you want to delete your account, you can start the process by going to your settings page on the Blink website or app. In the Deactivate/Delete Account section, click the ‘delete account’ button and confirm the deletion.
Do I have to keep the blink Sync module on?
Yes, you have to keep the Blink Sync Module on in order for the Blink cameras to remain connected to your home WiFi network. Without the Sync Module, the cameras cannot communicate with the Blink servers, and you would not be able to access the features of Blink, like motion detection, live streaming and cloud storage.
Additionally, you would not be able to access the Blink app without the Sync Module in place. Therefore, it is important to keep the Sync Module powered and connected if you want to rely on Blink for home security.
Can I unplug my Blink Sync module?
Yes, you can unplug your Blink Sync module. It is a good idea to unplug it whenever you need to move it for any reason. If you need to troubleshoot your Blink system, disconnecting the Sync module can help you identify any problems.
Additionally, if you are getting ready to travel with your Blink system, or temporarily move it to another location, then you may want to unplug the Sync module in order to ensure it is secure.
When you unplug the Sync module, you need to make sure to turn off all of your camera’s LEDs and other electrical components first. There is a risk of an electric shock if you do not do this. Once you have unplugged the Sync module, store it in a safe and dry place.
When you are ready to plug it back in, make sure that all components are back on to prevent any potential electric shock before connecting the Sync module.
How do I uninstall and reinstall my Blink camera?
Uninstalling and reinstalling your Blink camera is a straightforward process. First, make sure that your device is powered off and unplugged from the power outlet. Then, open the app on your device and go to the device menu.
Choose the camera you want to uninstall and click the “Uninstall” button. Once the uninstallation is complete, plug the camera back into the power outlet and turn it on.
Next, open the app again. Go to the “Add Camera” option, and select the type of camera you’re using. Follow the steps to register and set up the device. When the installation is complete, you’ll be able to view and set up the settings for your camera.
Finally, you can make changes to settings and adjust the camera preferences according to your need.
Why has my blink camera stopped working?
There could be several potential explanations as to why your Blink camera has stopped working. It may be due to a power issue, or even something as simple as the camera not being connected properly or not having the latest software version installed.
First and foremost, you should check the power source. Make sure the power adapter is properly connected to the camera, and it’s receiving power. You should also check the batteries if the camera is battery powered.
Change the batteries and see if the camera starts responding. If the power source is alright, then there are a few other things you can try.
Ensuring that the latest version of the Blink app is installed is important. If the version on your device is too old, it won’t be compatible with the camera, and it won’t be able to connect. So make sure you have the most up to date version of the app installed.
If both the power source and the app version are up to date and functioning correctly, then it’s likely just a connection issue. This can be something as simple as needing to reconnect the camera to the Wi-Fi network or you may need to delete the camera from the app and start the setup process over again.
These are all common issues that can arise with home security cameras, so if nothing is working, don’t worry. Guided help is available online and customer service is always at your fingertips. Contacting the manufacturer is a great way to get assistance and solutions to your problem.
How long does Blink sync module take to connect?
The amount of time it takes to connect your Blink Sync Module to your home’s Wi-Fi will depend on a few factors, including the strength and reliability of your Wi-Fi signal, the number of other devices connected to your network, and the size of your home.
Generally, it can take anywhere from a few minutes to an hour to completely sync. After your first connection, your Blink Sync Module should update automatically, typically within a few hours. If you are having trouble connecting, please contact Blink Support for assistance.
What’s the latest Blink app version?
The latest version of the Blink app is version 2.19.3, released on April 14th, 2020. This update includes improved notifications settings and data usage tracking, as well as numerous bug fixes and performance improvements.
The Blink app is available for both iOS and Android devices and can be downloaded from the App Store or Google Play Store. To ensure you have the latest version, make sure your device is running the most current operating system and then search “Blink” in the respective store.
If you already have the Blink app on your device, it will prompt you when an update is available, or you can check on your app store for the latest version.
What is the difference between Blink Sync Module 1 and 2?
The Blink Sync Module 1 and 2 are the two generations of Blink Home Security’s device-linking hub. These hubs allow users to wirelessly sync their Blink cameras with each other and to their mobile devices for remote access.
The main difference between the two is that Sync Module 2 is two times faster than the original Sync Module 1, allowing for more simultaneous and faster connection of Blink devices.
Sync Module 2 also supports Public Key Infrastructure (PKI) encryption, which is used to secure data and any communication happening between Blink devices, the Blink cloud, and their mobile devices.
Both Sync Modules allow for up to ten cameras to be synced together, however, Sync Module 2 has an extended range of up to 300 feet (the original Sync Module 1 has a range of 50-100 feet), allowing Blink cameras in larger homes and offices to be combined without sacrificing connection strength.
Additionally, Sync Module 2 has advanced antenna functionality which allows users to get better signals even through walls and other obstructions.
Sync Module 2 also has a lower power consumption than Sync Module 1. This means that it can be left turned on without a significant increase in energy usage. It also has indicator lights, so users know exactly when their cameras and the hub have securely connected.