Cabinet handles should be placed in the center of cabinet doors and drawers. This is because by centering the handles, they will have more stability, allowing them to handle the weight of the doors/drawers better and allowing users to open/close them more easily.
Additionally, centering the handles also creates a more aesthetically pleasing look. For drawers, handles should be installed 6-8 inches from the top for easier reach. Vertical handles should be measured and placed accordingly for drawers wider than 48 inches that have two handles.
Horizontal handles should be placed in the middle of the width of the drawer and should make a vertical line when the door is open. For double doors, two handles should be placed vertically, on the center divider of the two doors.
Lastly, knobs should be placed directly in the center of the door or drawer.
What is the rule of thumb for cabinet hardware?
The rule of thumb for cabinet hardware is to choose pieces that have a finish and size that are complementary to the cabinets, as well as to the other elements in the space. When selecting knobs and pulls, be sure to consider the size of the cabinets, as well as the other décor items in the room.
For example, if the cabinets are large, avoid selecting a small, delicate piece due to proportion. Additionally, the placement of the hardware can make all the difference in creating a cohesive design.
Typically, keep the hardware in line with the natural lines of the cabinets, but also keep in mind that an off-center placement can add visual interest. Finally, keep the hardware in the same finish for a seamless, uniform look.
When selecting cabinet hardware, it’s important to remember the design principle of balance and harmony, so experiment with different hardware pieces and placement to create a pleasing look.
What length should cabinet pulls be?
The length of a cabinet pull depends on the size of the cabinet door or drawer and the location where the pull will be installed. Smaller drawers, such as in a bathroom vanity, may require shorter pulls, while larger drawers may require longer pulls.
Typically, pulls should be 3” to 4” long with a common size of 3-3/4”. If you choose to install pulls on your cabinet doors instead of knobs, longer pulls are most appropriate. They should be 8” to 10” in length.
Additionally, if your cabinet has an overlay door with a recessed area, you should choose a pull that will fit into the space. This means the pull should be slightly shorter than the width of the recessed area.
Before making a final decision, make sure to measure the width of the recess to ensure that your pull will fit.
What hardware looks with white cabinets?
With white cabinets, there are many different types of hardware that can create a beautiful, modern look. For example, knobs and pulls in gold, brass, stainless steel, bronze, black and pewter are all classic and timeless options that can elevate the look of your kitchen or bathroom.
If your white cabinets have more of a classic look, consider opting for a more vintage-style, such as oil-rubbed bronze or distressed knobs and pulls with decorative details. For a more modern look, sleek, simple shapes in matte black are a great choice.
Additionally, there are more eclectic options, such as color-block drawer pulls, faceted gemstone knobs, or even fun statement pieces like novelty animal designs. With such a wide range of hardware styles to choose from, you can update your white cabinets with ease and create the perfect room for you.
How do I choose the right size kitchen cabinet hardware?
There is no definitive answer to this question, as the knob or pull that is “right” for your kitchen cabinets may depend on a number of factors, including the overall style of your kitchen, the specific style of your cabinets, the size and shape of your cabinet doors, and your personal preferences.
However, there are a few general tips that may help you choose the right size kitchen cabinet hardware for your space:
1. If your cabinets have a lot of detail or are otherwise very ornate, consider choosing a smaller knob or pull. dainty hardware will help to accentuate the cabinets, rather than overwhelming them.
2. Conversely, if your cabinets are fairly simple in style, you may want to choose a larger knob or pull. This will help to fill up the space and make the cabinets more noticeable.
3. Another factor to consider is the proportion of your cabinet doors. If they are very wide, you may want to use a longer and skinnier knob or pull, while narrower doors can handle a shorter and rounder hardware piece.
4. Ultimately, the best way to choose the right size kitchen cabinet hardware is to simply experiment and see what looks best in your space. Place a variety of different sizes and styles of knobs and pulls on your cabinets and see which ones you like the best.
You may be surprised at which hardware pieces you end up liking the most!.
What is center to center measurement for cabinet pulls?
The center to center measurement for cabinet pulls is the distance between the center of each screw hole. This measurement is important because it determines the size of the cabinet pulls needed. To measure accurately, it is best to use a measuring tape and place it between the centers of each screw hole.
It is also important to measure in multiple directions to determine the most accurate size. Measure horizontally, vertically, and on a diagonal to ensure that the same measurement is achieved each time.
Once the measurement is taken, use this number to look for cabinet pulls that match. Some cabinets may also require a long pull with center to center measurements that are 3 inches or more. As such, it’s important to ensure that the proper size is measured to ensure the best fit for the cabinet.
Can you mix knobs and pulls on kitchen cabinets?
Yes, it is possible to mix knobs and pulls on kitchen cabinets. This allows people to express their personal style and have an individualized look to their kitchen space. Different finishes and materials can be used to blend and elevate the design of the space while accentuating certain details.
Knobs and pulls come in an array of shapes, sizes, finishes, and materials, so there is a lot of opportunity to customize and mix and match to your heart’s content. When mixing knobs and pulls, it’s important to maintain harmony and balance in the cabinet design.
Consider the other fixtures and accents around the cabinetry when selecting the knob and pull designs, and try not to be too overwhelming with multiple different styles. When done correctly, mixing knobs and pulls can be a great way to maintain a unique and stylish look for your kitchen cabinets.
Where do pulls go on drawers?
Pulls, or handles, go on the front of drawers to make them easier to open and close. Depending on the style of the pull, they may be mounted on the top or the sides of the drawer. Some common places to mount pulls are at the center of each side, in the lower corners on each side, or in the center on the top.
If the drawer is flush with the rest of the cabinet, some pulls are designed to mount on the inside of the drawer. Depending on the style of the drawer, you may even see multiple pulls mounted on the front of a single drawer.
Before installing the pulls, be sure to measure the drawer to ensure your pulls fit properly.
Can you mix cabinet pull sizes?
Yes, you can mix cabinet pull sizes. This is a great way to add some depth and interest to the overall look of your kitchen or bathroom. Some popular combinations include mixing a larger size on oversized drawers, and then a smaller size on the remaining drawers.
You could also combine shapes, like round and square cabinet pulls, to create a unique and eye-catching look. When mixing up pull sizes, it’s best to choose a common material and finish to tie everything together.
Having too many different materials or finishes can make the overall design look chaotic and uncoordinated. Consider mixing up the sizes, but the materials and finish should generally be the same throughout the kitchen, bathroom, or other space.
How do you install knobs and handles on cabinets?
Install knobs and handles on cabinets is a relatively simple process.
Gather all necessary supplies: drill, screwdriver, screws, knobs or handles, and if necessary, a template.
Before installing drill pilot holes that are slightly smaller than the screws.
Place knobs or handles onto cabinet doors or drawers and decide on the overall placement and spacing. If a template is necessary, use that for clarity and accuracy in placement.
Make sure to study the product package for the proper screw size.
Use the drill to secure the screws into the knobs or handles.
Connect the other side of the screws onto the cabinet doors or drawers.
Tighten the screws to make sure the knobs or handles are firmly adhered onto the cabinet doors or drawers.
After all knobs or handles are in place, double check that they are firmly connected.
Finally, admire your work and enjoy the finished look of your cabinets with the knobs or handles installed.
What is the proper placement of handles on kitchen cabinets?
The proper placement of handles on kitchen cabinets varies depending on the type of cabinet, size, and location. For lower cabinets, the ideal handle placement is usually at the center of the door, between the top and bottom.
For upper wall cabinets, handles should be placed around five inches above the highest part of the cabinet, as this will make them easier to reach. Aside from the standard placement, some homeowners may choose to place handles on both sides of the cabinet doors.
This is especially useful for larger cabinets to make them easier to open, allowing for one-handed operation. When installing handles, it is important to ensure that they are securely attached and that their placement is consistent for each cabinet.
The locations and overall design should be considered prior to installation, as this will help ensure a visually appealing and uniform look throughout the kitchen.
Where should Pulls be placed on cabinet doors?
Pulls should be placed on cabinet doors in a location that is easy to access and can be reached without having to bend or stretch. It is best to place them on the upper third of the door. Generally, they should be centered horizontally and placed 3 to 4 inches below the top edge of the door.
However, depending on the size of the door and the person using the door, the placement should be adjusted accordingly. Additionally, it is important that the screws used to install the pulls do not protrude from the opposite side of the door, as this may present a finger pinch hazard.
Are cup pulls still in style?
Yes, cup pulls are still in style. Cup pulls, also known as “ring pulls” or “bar pulls,” are a classic and timeless design that is still popular in contemporary designs today. The discreet look of cup pulls is ideal for completing a modern or traditional look in any room.
Available in a range of shapes, sizes, and finishes, cup pulls are a versatile and attractive option for adding a touch of personality to any furniture or cabinetry. Not only are cup pulls aesthetically pleasing and timeless, but they also provide a functional and practical purpose.
The easy-to-grip design of cup pulls makes opening and closing drawers and cabinets effortless. Moreover, unlike handles that may dent or ding if something is dropped on them, cup pulls can remain in great condition for years.
For all these reasons, cup pulls remain a popular choice in interior design and can be used to create a cohesive and stylish look in any home.
Where can you use knobs and pulls?
Knobs and pulls are commonly used on furniture, doors and cabinets. These decorative hardware items serve the purpose of providing an opening and closing mechanism. Pulls can also be used in a variety of other applications, including on drawers, windows, gates and even appliances.
A knob can be used on anything that requires secure closure, such as cupboards or other items with doors, as well as drawers and room decor. Because of the wide range of sizes and styles that knobs and pulls come in, you can often find the perfect fit for any application.
What size drawer slides do I need?
The size of drawer slides you need will depend on the size of the drawer and the type of slides you need. Generally, most standard drawers are less than 20″ deep and require side-mount slides that will fit a 16” opening.
If you are using soft-close glides for heavier drawers, you may want to use a heavier-duty slide system. If you are using a full-extension slide system for a heavier drawer, you may need a slide that is rated for 100 pounds.
If you have an oversize drawer, you may need to look for slides that can accommodate up to 36” of opening. When selecting your drawer slides, it’s important to consider the weight of the items you’ll be storing in the drawer to ensure you have the right slides.
You should also measure the inside drawer dimensions to ensure that you select the right size slides.