In general, drawer knobs should be placed between 3 and 4 inches away from the top of the drawer, in the middle of the drawer front. This is the optimal location for easy and comfortable usage, especially when knobs on a pair of drawers are the same size.
Additionally, the knob should be placed at the center of the drawer face so it looks pleasing. This location also causes less wear and tear on the drawer over time. If the drawer faces are different sizes, it is best to center the knob on the smaller drawer face.
Do knobs or pulls go on drawers?
It is recommended that knobs go on drawers, as they are easily gripped and used to open and close the drawer with one hand. Pulls, which are longer and require two hands to open and close, should go on cabinet doors.
However, the choice between pulls and knobs is largely a matter of personal preference and design. Some people prefer the aesthetic of knobs on drawers and pulls on cabinet doors, while others prefer the opposite combination.
Ultimately, whatever design you choose will depend on the style, size, and material of your hardware, as well as the overall look of your kitchen or bathroom.
What is the rule of thumb for cabinet hardware?
When selecting cabinet hardware, it is important to consider the style, function, and size of the hardware. A good rule of thumb is to select hardware that is both functional and similar in style and finish to the rest of the cabinetry.
Selecting large-scale, sturdy hardware with large backsets that will stand up to frequent use is often a good option. When selecting hardware for a kitchen, pick pieces that are easy to grip and have a nice, smooth finish.
If you are selecting hardware for multiple rooms, it is best to pick coordinating styles and finishes, so that the overall look is cohesive. Lastly, keep in mind that good-quality hardware may cost more up front, but it is likely to last much longer than cheaper hardware, saving you money in the long run.
Where do knobs and pulls go on Shaker cabinets?
Knobs and pulls for Shaker cabinets typically go on the fronts of doors and drawers. Knobs are typically mounted on the outside of doors, while pulls are typically mounted on the inside of drawers. For doors with two knobs, they are typically placed on the left and right sides of the door.
For drawers with pulls, they are typically placed in the middle of the drawer. If desired, knobs and pulls can be placed slightly lower or higher than the standard position for a unique look. It’s best to keep the size and design of the knobs and pulls consistent with the style of the cabinets to create a cohesive look.
Should cabinet pulls be vertical or horizontal?
When it comes to choosing between vertical or horizontal cabinet pulls, there is no definitive answer. Generally, it comes down to personal preference; however, there may be some practical considerations to bear in mind.
Generally, horizontally mounted cabinet pulls are seen as more contemporary, whereas vertical pulls are considered more classic or traditional. If you are having trouble deciding which direction to go for your cabinet pulls, it is best to take the look and feel of the rest of the room into account.
If the room is modern, then horizontal pulls can be a great choice. If it is more classic or traditional, then vertical cabinet pulls may be a better option. Additionally, the size of the cabinet door or drawer may also affect the decision.
In smaller cabinets, horizontal pulls may be a better fit, as the vertical pulls may take up too much space. Ultimately, it is best to look at a variety of options and go with what you think looks best.
Where do you put kitchen door knobs?
Kitchen door knobs should be installed on the side of the door where the hinges are located. Typically, door knobs are placed several inches down from the top of the door and several inches in from the edge of the door frame.
Additionally, most door knobs are installed in the same location on both sides of the door. This is to make sure that the door can be easily opened from the outside as well as from the inside. It is important to take the time to measure out the knob’s placement before installing it.
This will ensure that it’s in the proper location, is secure and will provide a comfortable grip for opening the door.
What size pulls for 36 inch drawers?
When choosing pulls for drawers, the standard is to allow three inches of space between the pull and the edge of the drawer. This ensures that the pull is easy to grab and able to be used effectively.
For 36-inch drawers, you should look for pulls that measure 3-1/2 or 4-inches long to maintain this ideal three-inch gap. However, depending on the style of pull, you may want to go a bit smaller or larger, such as 2-3/4 or 4-1/2-inches.
Make sure you take measurements of your existing drawers as well as view the pull in person to ensure the right size and look.
How do you mount drawer pulls?
Mounting drawer pulls is a simple process, but one that requires careful attention to ensure a successful outcome. Begin by using a ruler to measure and mark the locations of the pulls. For a symmetrical finish, it’s important to ensure that the pulls are spaced evenly.
Then, use a drill and screwdriver bit to create a pilot hole into the drawer front, making sure to not drive the screws too deeply, as this can cause a dent in the surface.
Record the depth of the pilot hole, then use a bit of the same size for the screws you purchased for the drawer pulls. Carefully drive the screws into the holes and tighten them securely. Having the correct drill bit for the screws helps prevent them from becoming stripped during installation.
If the screw does strip, use a drill bit designed for boring out the entire hole and start again. Once the screws are secure, you can attach the pulls and check their alignment to ensure a uniform look.
Are drawer pulls supposed to be centered?
Whether drawer pulls should be centered or not depends on personal preference and the type of hardware being used. Generally refrigerator and cabinet doors have pulls to the side or top and bottom, while drawers typically have pulls along the middle.
However, drawer pulls can still be useful on cabinet doors, and some people prefer the look and feel of them, in which case the pulls should be centered. If a room has a variety of cabinet styles, it is acceptable to mix and match hardware, focusing on the overall effect.
If you would like a more coordinated look, it is recommended to keep all the hardware centered and consistent.
Where should handles go on drawers?
Handles should be placed on drawers in the center of the drawer front, horizontally. For larger drawers, the handles should be placed within 6-10 inches of the top and bottom edges. To improve the look, you can place two handles side-by-side, creating symmetry.
If you would like to hang the drawers rather than pull them out, two or four corner mounting holes can be drilled for hanging the drawers on hinges. Keep in mind that drawers suspended from hinges may require a latch to keep them closed.
How do you center handles on drawers?
When centering handles on drawers, the first step is to measure the drawer width. Then, measure the handle and subtract any extra hardware that is necessary for attaching the handle. Once the width of the handle has been determined, divide the drawer width by two, and that should give you the center point.
Mark the center point on the drawer using a pencil, then insert the necessary hardware for the handle and secure it in place. Finally, insert the handle and make sure it is centered. If the handle does not stay centered, use a level to make sure it is straight or use a drill to insert screws to hold it in place securely.
What does center-to-center mean for drawer pulls?
Center-to-center is a term used to describe the space in between two drawer pulls. It refers to the distance between the center of each pull and is typically measured in inches. This measurement will determine the size of the pulls needed for a drawer or cabinet.
For example, if you need pulls 3 inches apart, you would need a pull with a 3-inch center-to-center measurement. It’s important to find the right center-to-center measurement for your drawer holes, as this will ensure that your drawer pulls fit properly and look cohesive.
Center-to-center measurements can range from 1 inch to 36 inches depending on the size of the drawer and the type of pull being installed.
How wide should a handle be for a drawer?
The ideal handle width for a drawer varies depending on the size and function of the drawer. Generally speaking, the handle should be wide enough to be easily gripped with one hand, but not so wide that it is awkward or uncomfortable to grip.
For standard drawer sizes, handles between 1-1.5 inches wide are typically recommended.
In some cases, two handles may be more suitable than one handle. For example, drawers that are especially wide or deep may make it more difficult to access their contents with one hand. In this case, two handles that are each 1-1.
5 inches wide may provide increased comfort, stability, and ease of access. It is important to note, that in this case, the distance between the handles should be approximately equal to the width of one handle; for example, if each handle is 1 inch wide, the distance between them should also be 1 inch.
Ultimately, when determining the width of a handle for a particular drawer, the best practice is to experiment. The size and weight of the drawer should be taken into consideration, and if possible, the handles should be tested with an actual user to get feedback on functionality, comfort, and access.
Where should handles be placed on kitchen cabinets?
The placement of handles on kitchen cabinets can greatly affect the overall aesthetic of a kitchen, so it is important to give it appropriate thought and consideration. Generally, handles are placed near the corners of the cabinet doors, with two handles per door.
If the door is particularly wide, consider adding an additional handle in the center of the door. When deciding which side to mount the handles on, consider the direction of traffic flow in the kitchen.
If the door opens into walkway, handles should be mounted on the side that will be easily accessible when the door is open. In the same vein, handles should be mounted on the side that will be the easiest to open with the least amount of shifts in position or movement.
What hardware looks with white cabinets?
When it comes to selecting hardware to go with white cabinets, the options are virtually endless. Whether you’re looking for something contemporary and sleek, or something more classic and traditional, there’s a hardware that can complement your white cabinets perfectly.
For a classic, timeless look, you can choose from a variety of finishes such as brass, bronze, or stainless steel. If you’re looking for a more modern or contemporary style, you can opt for options such as chrome or nickel.
You can also further personalize the look by selecting a range of sizes. From smaller knobs and pulls to larger handles and pulls, any combination can work with white cabinets. Additionally, if you want to add a personal touch or make a bold statement, choose a unique shape or style.
From pulls that resemble branches with twigs and leaves to sleek oversized pulls, your choice of hardware will have an immediate impact on the overall look of your kitchen.
What color knobs white cabinets?
When choosing knobs for white cabinets, the options are really endless. It all depends on the look you’re going for and your personal style. If you’re looking to keep an overall light and bright look, you may choose knobs that are a light shade of gray, silver, white, or even golden.
If you’re looking to add a bit more contrast, try black or navy blue, or a deep green. If you’d like to make a bolder statement, choose knobs in brighter shades such as yellow, orange, or pink, or even go for something with a bit of a pattern.
Before you commit to one color or style, it can be helpful to get some samples and try them out against your cabinets.
How big should knobs be on cabinets?
The size of the knobs on your cabinets will depend on personal preference as well as the size of your cabinets. Generally, the larger the cabinet, the larger the knob should be. The standard knob size usually ranges from 1.
5 inches to 2.5 inches in diameter. However, depending on design style and the size of the cabinets, the knob size can be larger or smaller. If you are looking for something more ornamental, try knobs that are at least 2 inches in diameter.
It is important to note that no matter what size you choose, the placement of the knob should be ergonomic and should be placed in a location where your hand easily accesses it.