Kobalt air impact tools are manufactured by Snap-on Industrial Brands, a division of Snap-on Incorporated, a global leader in tooling solutions. Operating since 1920, Snap-on is dedicated to creating innovative products and solutions for a variety of industries, including construction, automotive repair and industrial service.
Its air impact tools feature cutting-edge innovation that has been designed especially for performance from professional users in mind. Their selection of Kobalt air impact tools provide precise and reliable performance, and come with a 25-year warranty for professional use.
The range offers a selection of impacts wrenches, ratchets, air drills, and air hammers, with a variety of sizes to match individual needs. Additionally, the tools have been designed with ergonomics in mind, allowing users to work with minimal fatigue.
How much torque does a Kobalt impact wrench have?
The amount of torque a Kobalt Impact Wrench has varies depending on the model. The 8.5 Amp 1/2-inch Impact Wrench has up to 400 ft. -lbs. of torque, while the 18 Volt 4.0 Ah 1/2-inch High Torque Impact Wrench offers up to 600 ft. -lbs.
of torque. The 18 Volt XTR Brushless High Torque 1/2-inch Impact Wrench is the strongest of the bunch with up to 700 ft. -lbs. of torque for heavy-duty jobs. All models feature a variable speed trigger and convenient forward/reverse lever for added control.
How often should an air impact wrench be lubricated?
An air impact wrench should be lubricated every time it is used. It is important to use lubricant oil specifically designed for impact wrenches. This type of oil is meant to protect the bearings, O-rings, and cylinders against corrosion and wear.
To properly lubricate an impact wrench, you should add 1-3 drops of high-quality lubricant oil to the air inlet before using the tool. Make sure to check the oil level after each use and top it up with an additional 1-3 drops if necessary.
It’s also important to regularly inspect the tool for any signs of wear and tear, as well as replace worn parts periodically as recommended by the manufacturer. Finally, you should always ensure that the oil and lubricating areas are clean before lubrication.
Can you use 3in1 oil on air tools?
Yes, 3in1 oil can be used on air tools. 3in1 oil is a multi-purpose lubricant and protects metal surfaces by preventing rust and wear, as well as lubricating moving parts. In an air tool, 3in1 oil can be used to lubricate internal O-rings and seals, as well as air tools’ moving parts, such as pistons, cylinders, and anvils.
Additionally, 3in1 oil can be used to lubricate any bearings and other metal parts to reduce friction and help the tool run smoothly. Before using 3in1 oil, however, it is important to clean the tool and surfaces carefully to ensure no dirt or debris is present.
If a tool is especially dirty, it is best to use a solution designed specifically for cleaning air tools. After the tool has been cleaned and dried, you can safely apply 3in1 oil to the internal moving parts and metal surfaces.
What kind of lubricant is used on an air impact wrench?
The type of lubricant used on an air impact wrench will depend on the specific model of the wrench. Generally, air impact wrenches require SAE 30-weight non-detergent oil for lubrication. This oil should be added to the air inlet per the manufacturer’s instructions.
It is important to not use a synthetic oil, as it will negatively affect the equipment. Additionally, it is recommended to add a few drops of the oil each time you use the tool to ensure that it is well-lubricated and functioning properly.
If the impact wrench is in constant use, oil should be added every 500 hours of use or you can use an air line lubricator, that has a small chamber, to add oil to the air line automatically.
How often should I oil my air tools?
You should oil your air tools on a regular basis to ensure they continue to perform optimally. Depending on the type of air tool you are using, the recommended frequency of oiling will vary. Generally speaking, you should oil the tool after every 20 to 40 minutes of use.
In addition, it is recommended to lubricate the tool at the beginning of each use to keep the seals and cylinders lubricated. Furthermore, you should be sure to check the lubrication level of the tool regularly and oil any moving parts on a monthly basis or as needed.
For best performance, be sure to use only oil specifically designed for air tools, and make sure the oil is compatible with the air pressure and temperature of your equipment. Doing so will ensure your air tools remain reliable, durable and efficient for many years to come.
Do air tools need to be lubricated?
Yes, air tools need to be lubricated in order to maintain their performance and prevent any damage caused by friction. Air tools, such as impact guns, ratchets, grinders, etc. use compressed air to generate power, so they need to be properly lubricated to reduce friction and wear on all of their internal parts, as well as to help create a more efficient operation.
To properly lubricate your air tools, use an oil specifically made for air tools, such as SAE10W-30 motor oil for light-duty applications or a synthetic oil for heavier duty applications. You should also be sure to lubricate all the moving parts of your air tools on a regular basis.
For example, you can run a few drops of oil through your ratchet every time you use it. Additionally, you should also check for any dust or dirt build-up inside the air tool and be sure to clean out any that you find.
By ensuring your air tools are properly lubricated, you can help to extend their life and performance. Proper maintenance of your air tools can also help reduce your chances of experiencing any expensive repairs or replacements in the future.
How do you maintain an impact wrench?
Maintaining an impact wrench is relatively easy and straightforward and can help keep it running in great condition for years. First, always check to make sure the air pressure is set to the torque requirements of the job you are doing.
Failing to do this could lead to overloading the motor, which will likely damage the wrench. You should also make sure the air filter is regularly cleaned and the lubricant reservoir is well stocked.
Lastly, after each use, be sure to wipe the wrench off using a damp cloth to remove any dust or debris. This will help prevent a buildup of grit and grime that can cause the working parts to wear out prematurely.
Doing these simple maintenance steps and treating your impact wrench with care should ensure it runs smoothly and provides years of reliable service.
How often should I grease my impact gun?
Greasing your impact gun should be done on a regular basis to keep it functioning reliably and safely. This includes before and after each use and once every month even if the gun is not used regularly.
To grease your impact gun, clean any dried-on dirt or other debris, such as rust, off of the tool. Then, apply a thin layer of grease to the exterior parts of the gun, such as the hammer casing, armature bearing, spindle and hammer nose.
You’ll also want to make sure you apply lubricant to the interior parts, including the hammer and anvil. Additionally, you should use an appropriate, high-quality grease made specifically for power tools.
Finally, use a cloth to wipe away any excess grease and ensure that the gun is properly lubricated.
Where do I put oil in my air impact gun?
If you have an air impact gun, adding oil is an important step in keeping it in proper working condition. To add oil, locate the oil fill cap on the back of the gun. Once you have found the cap, unscrew it and you will find a tube that deposits oil directly into the gun when oil is poured over it.
Fill the tube with oil until it reaches the full line, which is usually indicated by a series of dots near the tube. Once the tube is full, replace the cap, start up the gun and check for oil leaks. Replace the cap again and you’re ready to go – your air impact gun is now properly lubricated for use.
Why is my air impact wrench weak?
One of the most common causes is if the air compressor is not providing enough air pressure to the tool. This could be due to a malfunctioning air compressor or a blockage somewhere in the air hose. Additionally, the size of the socket being used could also be an issue if it is too large for the wrench or if the socket is not snugly fit to the fastener.
Finally, if the tool isn’t lubricated with grease frequently enough, the internal components can seize and lead to decreased power output. To ensure the maximum output from your tool, you should always make sure that the air hose and compressor are in good working condition, the proper size socket is being used, and the tool is lubricated on a regular basis.
Do all air tools need oil?
No, not all air tools need oil. Generally, oil-less air tools such as grinders, sanders, and screwdrivers require no additional lubrication. However, more complex air tools such as air compressors, nail guns and impact wrenches, typically require oil to ensure optimal performance.
Oil-lubricating air tools should be re-oiled often, as the lubrication breaks down over time due to wear and tear. Additionally, the oil helps to protect against rust and corrosion, so it is important to regularly inspect and maintain your tools to ensure proper functioning.
What should be done before every use of an air tool?
Before every use of an air tool, it is important to inspect the tool for any damage and make sure all parts are functioning correctly. Check for any missing screws or loose connections, as well as signs of wear and tear.
Make sure the compressor used is running correctly and the pressure is correct. Additionally, inspect all of the connections used with the air tool and make sure they are properly attached and tight.
Finally, ensure the area around the tool is clean and free of debris, as it can cause clogging or damage the tool.
Do I need an oiler for air tools?
Yes, you do need an oiler for air tools. Without an oiler, the tool would not run smoothly and could be prone to extreme wear over time. Oiling tools regularly helps to lubricate both internal and external components, ensuring a smoother, cleaner running motor that is resistant to wear and tear, as well as reducing wear on other parts.
Over time, lack of oiling can cause parts to wear out quicker and can also cause them to break or malfunction. For this reason, it is important that an oiler is used on every air-powered tool.
What weight oil is air tool oil?
Air tool oil typically weights anywhere between 5W-30 and 20W-50, depending on the manufacturer’s recommendation and the climate in which the tool is being used. Depending on the viscosity, the oil will be able to flow more freely at temperatures lower than recommended for the oil, but will become less efficient (and potentially dangerous) in higher temperatures.
Generally speaking, the 5W-30 oil is best for colder climates, while 20W-50 is preferred for hotter climates. As with regular automotive engine oil, air tool oil should have the highest viscosity recommended for the specific climate; if it is too thick, it won’t thin out enough to lubricate the tool properly.