If you cannot see your Sonos Move in the Sonos app, it could be because the device is powered off, not connected to the same Wi-Fi network, or the Sonos app isn’t up to date. To make sure that the Move is powered on you can press and hold the play/pause button for five seconds.
If the light on the back is still orange, it may need to be charged. If the Move is connected to the same Wi-Fi network as the app, try rebooting your router and re-setting the Move up. Finally, if the Sonos app isn’t up to date, open the app and tap More, tap Settings, tap Software Updates, and tap Check for Updates.
If there are any updates, make sure to install them so that the device is up to date.
Can’t get my Sonos Move to connect?
If you are having difficulty connecting your Sonos Move, there are several steps you can take to try to troubleshoot the problem. First, make sure to update your Sonos system to the latest software version.
You can do this by clicking on the “Settings” tab in the Sonos app and then selecting “System Updates” from the menu. You may need to reset your router or modem in order to make sure the update is properly installed.
After that, make sure your Wi-Fi network is properly configured. Check to make sure your router is within range of your Sonos Move, and make sure your network is not using WEP connections. Finally, try resetting your Sonos Move.
You can do this by pressing and holding the power button on the Sonos Move itself for around 10 seconds until the status light turns orange. If you have reliable Wi-Fi and are still unable to connect, try calling the Sonos support line at 1-800-585-3737.
How do you reboot a Sonos Move?
Rebooting a Sonos Move can be done by pressing and holding the Play/Pause button for 10 seconds, until you hear a voice prompt saying “Rebooting”. The light ring on the Move will turn off and then be illuminated again, indicating the reboot is in progress.
Once the reboot is completed, the Move will emit a chime and the voice prompt will indicate the reboot is complete. It may take up to a minute for the reboot to be completed. If the reboot does not occur after you execute the above steps, you should contact Sonos support for further assistance.
What does flashing orange light mean on Sonos Move?
The flashing orange light on a Sonos Move indicates that the speaker needs to be connected to a power source. This is necessary to charge the speaker, as it is a battery-powered device that needs to be regularly charged for use.
Additionally, it may mean there is a problem with the connection or power source, so replacing the power source may be necessary if the light continues to flash. If the light is blinking or flashing steadily, it could be an indication of a software update in process.
In this case, the speaker will need to be connected to a power source while the update is in progress.
Why is my Sonos Move flashing blue?
The blue flashing light is an indication that your Sonos Move is in pairing mode, which means that it is ready to be connected to a Wifi network. To set up the device, you’ll need to open the Sonos App on your phone, select Settings, and follow the on-screen instructions for setting up a new device.
During the setup process, you will be asked to select your preferred Wifi network. Once it is connected to the Wifi network, the light on the Move will stop flashing and the Sonos App will prompt you to connect it to other Sonos speakers on your network.
After completing the setup process, your Sonos Move will be ready to use.
Why is my Sonos suddenly not connecting?
It is possible that your Sonos is suddenly not connecting due to a variety of reasons. Firstly, it could be due to a weak Wi-Fi signal, as this device relies on an internet connection to operate. Make sure to check that your network is connected to strong Wi-Fi with a strong signal before trying to reconnect.
Also, make sure your router is functioning correctly by checking its lights. Secondly, it could be due to a recent software update. Since Sonos is an ever-evolving product, its software is also constantly updated.
It is possible that a recent update is causing the issue. If so, try uninstalling the most recent software update to see if that fixes the issue. Lastly, it could be due to a compatibility issue between your router and your Sonos.
Try checking your router’s settings and make sure any firewalls are not blocking Sonos’ access. If your router is still not compatible, try alternate routers that might allow the connection.
Why won’t Sonos find my speaker?
There are a few potential reasons why your Sonos speaker may not appear in the Sonos app.
First, make sure that your speaker is nearby and powered on. If WiFi or Bluetooth isn’t enabled on your device, then the Sonos controller app won’t be able to discover your speakers.
Next, ensure that your Sonos system is properly set up. Your router must support UPnP to work with Sonos, and if you are connecting over an Ethernet cable, make sure the cable is securely connected from the back of your router to the back of your speaker.
Also, make sure that all of your Sonos products are running the latest software version. If the software is not up to date, the Sonos app won’t be able to find your speaker.
If you are still not seeing your speaker in the app, try performing a “Forget This Speaker” procedure, which is done by pressing and holding the play/pause button and the volume down (-) button concurrently on the speaker while it’s connected to power.
If the procedure is successful, the device will have been reset and the Sonos system will scan for any available Sonos products again.
Finally, if none of these steps are successful, try unplugging the speaker and plugging it back in, and then try to add the speaker again. If all else fails, you may need to contact Sonos customer service for further assistance.
How do I put my Sonos one in pairing mode?
Putting your Sonos One in pairing mode is easy. First, make sure that the device is powered on. Then, press and hold the “Mute” button on the device until the LED light flashes orange. This will indicate that the device is in pairing mode.
You can then connect to the device using the Sonos app, or using the device’s AirPlay 2 settings. Once you’re connected, you can begin streaming your favorite music, radio, or podcast. If you’re having trouble connecting, use the included Sonos setup guide or contact the Sonos support team for assistance.
What is the infinity button on Sonos Move?
The Infinity Button on the Sonos Move is a feature that allows you to play music from your streaming services without needing to use your phone or another device. The button will give you access to popular radio stations and playlists, like Apple Music Hits radio or Today’s Hits, no matter if you’re connected to Wi-Fi or not.
With just one tap, your music will start right away. With its long-lasting battery, you’ll be able to take the Sonos Move to places your other devices couldn’t go and enjoy amazing sound quality anywhere you go.
That’s the beauty of the Infinity Button—it helps you discover new music even when you don’t have your phone or internet access.
Can I move my Sonos to another house?
Yes, you can move your Sonos to another house. All you will need to do is unplug your speakers from the wall and take them with you. Once you have arrived at the new home, you will need to plug them in and connect to the same Wi-Fi network you were previously connected to.
You should be able to navigate to the Sonos Controller app and find your speakers, allowing you to control your music and other music streaming services. Additionally, if your speakers are connected to a home theater setup, you will need to disconnect the cords from behind the receiver and reconnect them to your new receiver in the new home.
Can I unplug my Sonos speaker and move it to another room?
Yes, you can easily unplug your Sonos speaker and move it to another room. As long as the area has no obstructions, the speaker should easily be able to maintain a strong connection with your Wi-Fi network.
Additionally, the speaker has a powerful battery that will keep it powered as you move it around. Make sure you also check the device’s range to ensure it will be able to access the network in more remote areas.
Once you have plugged the speaker in its new location, the easy-to-use app allows you to quickly and easily set up the speaker. You can even group multiple Sonos speakers together to create a stereo or surround sound experience in any room.