First, make sure your trimmer head is fully lined up and tightened. If it’s not secure, the line won’t feed properly. Secondly, make sure your spool of trimmer line has enough on it. If it’s too thin or wrong size, the line won’t feed properly.
Finally, check the cutting head itself. If it’s clogged or jammed with grass or debris, the line won’t feed. If all of these check out and you’re still having trouble, you may need to replace the trimmer head to get your trimmer line to feed correctly.
Are you supposed to soak trimmer line?
Yes, you should soak your trimmer line before using it to help prevent tangling and enhance its overall performance. To soak the trimmer line, start by cutting the length required and then submerging it in a bucket full of warm water for 15-20 minutes.
This will help to soften the line and make it more flexible. After soaking the line, you should fully dry it off before loading it onto the spool of the trimmer and firing it up. When cutting, allow the trimmer to work at full throttle in order to keep the line from clogging; otherwise, it can jam and create excess friction which can ultimately cause the line to break and become short.
By properly soaking the trimmer line and ensuring that it is loaded and then used correctly, you should be able to enhance its performance and maximize the number of edging cuts you can make.
How do you lubricate line trimmers?
Lubricating your line trimmer is an important part of keeping it in good working order. Here’s how to properly lubricate your line trimmer:
1. Start by checking to make sure there isn’t any existing oil on the line trimmer, as too much oil can cause deposits to accumulate and can damage the engine. If there is any oil present, wiped it off with a dry cloth.
2. Apply two-cycle engine oil to a clean, lint-free cloth and wipe the outside of the engine, the motor housing, the exhaust, and the drive shaft.
3. Add a few drops of oil to the trimmer head. Turn the trimmer head counterclockwise and allow the oil to run down the shaft and into the gearbox and trimmer head.
4. Run the engine for a few seconds and then shut it off. This will help ensure the oil is able to fully distribute within the trimmer head and gearbox.
5. Lastly, wipe off any excess oil with a clean, lint-free cloth. This will help keep your line trimmer in good working order.
Following these steps should help ensure your line trimmer is properly lubricated and functioning at its best. Remember to also inspect your trimmer head and replace any worn or damaged components to keep it in good working order.
What grease should I use for gears?
When it comes to lubricating gears, there is no one-size-fits-all solution. Different types of gears require different types of grease, depending on the application, environment, and load. In general, a good starting point for most gears is a high-performance EP (extreme pressure) grease, such as a lithium complex or a polyurea grease.
These types of lubricants are designed to stand up to extreme pressure, vibration, and temperature extremes. Greases with an NLGI (National Lubricating Grease Institute) grade of 2 or 3 are usually sufficient for most applications.
For higher-temperature applications, potential grease options include aluminum complex, calcium sulfonate, molybdenum disulfide, and various synthetic greases. If the gears are intended for use in a corrosive environment, then a grease designed for corrosion resistance should be used.
Ultimately, selecting the right grease for gears requires careful consideration of the application and environmental constraints, as well as the load conditions.
What type of grease does Stihl use?
Stihl uses a special grease called “STIHL Ultra HP” for their wide range of power tools. This grease is specifically designed to meet Stihl’s high standards while providing superior protection to your power tools.
It is highly resistant to high pressure and temperatures, as well as being resistant to water washout. STIHL Ultra HP contains a high quality lithium soap-based thickener and additives to provide superior lubrication, extended lubrication intervals and exceptional mechanical stability.
In addition, it is fortified with anti-oxidation and rust preventive additives to protect against corrosion and provides excellent compatibility with STIHL products. Stihl recommends changing the grease after every 600 hours of use, or sooner if certain conditions are present.
How long should you soak trimmer line in water?
Ideally, you should soak trimmer line in water for at least 30 minutes in order to maximize the strength and effectiveness of the line. This soaking process helps to strengthen the line and prevent it from snapping, but it also helps to soften the line and make it more pliable to use.
The longer you soak the line, the easier and more efficient it will be to use. Additionally, soaking the line in water helps to reduce the amount of friction as it comes into contact with the trimmer head and ensures a more even, smoother cut.
For best results, you should soak the trimmer line for at least 30 minutes to ensure it is at its strongest and most efficient.
How do I rehydrate my trimmer line?
The best way to rehydrate your trimmer line is to soak it in a bucket or plastic container filled with clean water. You should fill the container enough to cover the entire line, and let the line soak for at least 15 minutes.
After the soaking period is over, remove the line from the water and hang it up to dry. To help the process along, you can lightly massage the line while it is drying. This is especially effective if the trimmer line has become crimped.
If the line is still brittle after the first soaking, you can repeat the process to ensure full rehydration. Once it is fully rehydrated, you should give the line a light coating of oil or wax to help prevent it from becoming brittle again in the future.
Does trimmer line get brittle with age?
Yes, trimmer line is known to become more brittle over time due to the effects of weather, environmental conditions, and extended use. Ultraviolet rays from the sun can cause wear and tear on the trimmer line, resulting in a breakage more quickly than usual.
Additionally, extended exposure to extreme temperatures (both low and high) can cause the line to become more brittle, leading to wear and tear on the material. To maintain the highest level of durability over time, it is important to be aware of the effects of the environment on the trimmer line and take precautions as necessary.
For instance, if the trimmer line is being stored in a high-temperature environment, it may be a good idea to keep it in a cooler area or in its original packaging. Additionally, cleaning and checking the trimmer line often can help to extend its life and make the material more resilient to wear and tear over time.
Is Thicker strimmer wire better?
The answer to whether thicker strimmer wire is better depends on what you need the wire for. Generally, a thicker strimmer wire will last longer and provide more consistent results when cutting back thick or tough grass and weeds, due to the greater force it will be able to exert on them.
Thicker strimmer wire is also often better for wetter or damper conditions as it can handle water better and also be less likely to break in such conditions. Additionally, a thicker strimmer wire has more resistance to abrasion and can therefore cut for longer more safely.
However, the main disadvantage of thicker strimmer wire is that the user may struggle to reach all areas due to the thicker wire, including tight corners and gaps. Similarly, thicker strimmer wire may also not be suitable for finer details, such as hedge cutting, as the greater torque and resistance can potentially compromise accuracy.
Ultimately, if accuracy and delicacy of cutting is not an issue, then a thicker strimmer wire can be a great choice as it can last significantly longer and can provide better results on tougher grasses.
What is the toughest trimmer line?
The toughest trimmer line is typically one made of a thick, durable material that can stand up to tough, heavy-duty use. For commercial use, Diamond Cut trimmer line is a popular choice and is made of an ultra-durable polymer blend.
It’s designed with a patented grooved design and cuts through weeds, grass, and heavy brush with ease. This type of line is mainly used with larger, straight-shaft trimmers that have enough power to handle it.
If you’re looking for something for light-duty trimming, there are options made from nylon or similar materials that are better suited for that type of work and are more flexible. Whichever line you choose, make sure it’s specifically meant for the type of trimmer you have and that it’s rated for the amount of power the trimmer produces.
When should I replace trimmer line?
You should replace your trimmer line as soon as you notice it has become frayed or worn down. Over time, the line can lose its shape and integrity, making it ineffective in trimming along hard-to-reach spots or dealing with tough weeds and grasses.
Additionally, if the line gets too long, it may become harder to manage and can even cause a safety hazard. If you notice any of these signs, it’s best to replace the line as soon as possible. You may want to regularly check the line for signs of wear, as this will help extend its life and ensure your trimmer is as safe and effective as it can be.
Why does string trimmer line keep breaking?
String trimmer lines can break for a variety of reasons. One of the most common causes of string trimmer line breakage is edges that are too sharp, which can cause the line to fray and eventually break.
Additionally, if the line is damaged in any way – such as worn, bent, or stepped on – it can make it more likely to break. Other causes of string trimmer line breakage may be due to incorrect installation or setup of the trimmer, which can result in the trimmer running too fast or too long.
It’s also possible for the trimmer line to be affected by dirt or debris, which can create small nicks or tears that may cause the line to break. Finally, poorly maintained trimmer heads can cause the line to break more easily than usual.
Make sure to regularly inspect the trimmer head and ensure it’s in good working condition to help minimize the chances of frequent line breakage.
What trimmer line do landscapers use?
Landscapers typically use round or twisted trimmer line when trimming grass and other vegetation. Round trimmer line is more common as it is less expensive and easier to install in a trimmer head. However, twisted trimmer line is a better choice for thicker, woody vegetation as the twist helps to cut through material better.
Generally, a trimmer line with a diameter between 0.065 inches and 0.130 will suffice for most grass and vegetation trimming. It is important to choose a line with a diameter that is appropriate for your specific trimmer as too thick of a line can cause strain on the trimmer’s motor.
Choosing the right trimmer line will not only make the job easier, but it can also help to prevent damage to the trimmer’s motor.
How can I make my string trimmer last longer?
To make your string trimmer last longer, it is important to follow a few simple steps that will help keep it running smoothly.
First, make sure you use the right fuel mixture. In most cases, a mixture of two-cycle engine oil and regular gas is recommended. Never use any fuel or oil that are labeled as “low smoke” or “no smoke”.
These types of fuel can damage the engine over time.
Secondly, regularly clean your trimmer. After each use, be sure to rinse the outside of the machine and remove any debris from inside the cutting area. This will reduce the chances of dirt and debris from clogging up the system and help it continue to run well.
Third, have a trimmer technician check the spark plug and air filter at least once a year. A clogged air filter can prevent the proper air flow from reaching the spark plug and reduce the trimmer’s efficiency.
A worn-out spark plug can prevent the engine from receiving the proper spark.
Finally, make sure to winterize your trimmer when the cold weather arrives. Be sure to add fresh fuel, replace the spark plug, and drain the plug to help prevent freezing and clogging.
Following these simple steps will help ensure your string trimmer lasts longer and keeps running efficiently.