There could be a few reasons as to why your Beats Pill Bluetooth is not working correctly. First, it could be due to a loose or malfunctioning Bluetooth connection. Make sure your device is close enough to the speaker and that there are no obstructions between them.
Additionally, check to see if the speaker and device are paired correctly. If they are not, ensure that your Beats Pill Bluetooth is discoverable and that the device you are connecting to is set to search for new connections.
It is also possible that the battery connection in the speaker is loose or malfunctioning. You can remove the battery and reinsert it, making sure it is secure. Additionally, you may want to check if the battery needs to be replaced.
It could also be that the speaker is faulty, in which case you could try to reset it or contact customer service for help.
How do I reset my Beats Pill Bluetooth?
If you need to reset your Beats Pill Bluetooth, the first thing to do is to turn off the device. To do that, hold down the Power button on the device for at least 10 seconds. Once the device has turned off, press the Power button again to turn it back on.
Then, the device will begin resetting itself. Once the reset is complete, the Beats Pill will enter pairing mode and be ready to be paired with a Bluetooth device.
Afterwards, if you’re using an iOS device, you’ll need to go to your Settings > Bluetooth and select the Beats Pill. Your device should then connect automatically. For Android devices, simply go to the Bluetooth menu in your device’s settings and scan for devices.
Then, select the Beats Pill from the available devices.
Finally, if your device isn’t connecting via Bluetooth, you may need to reset your Beats Pill a second time. To do this, hold down the Power button for at least 15 seconds until the device turns off.
Then, press the Power button again to turn it back on and the device should then enter pairing mode.
Can Beats Pill connect to each other?
Yes, Beats Pill+ speakers can be connected in stereo using the built-in Bluetooth technology. Two or more Pill+ speakers can be connected to experience powerful stereo sound with extra depth and clarity.
To connect multiple Pill+ speakers in stereo, first place each speaker in its own independent source. Now, use the Powerbeats app, available for both iOS and Android, to set up your speakers for stereo mode.
In the app, you can connect and control the volume of each Pill+ speaker individually. Next, start playing music from your device. Once the music is flowing from both speakers, you can adjust their volume balance individually or together.
Beats Pill+ speakers also offer Party Mode, which allows up to 8 Pill+ speakers to be connected simultaneously and playing whatever is playing through the master speaker. This mode gives you the power to fill large spaces with wall-to-wall sound.
So, if you’re looking for a powerful and immersive wireless stereo system, the Beats Pill+ speakers are a great choice.
How long does the Beats Pill battery last?
The battery life of the Beats Pill depends on the specific model and how much sound is being used. For the original Beats Pill the battery life is approximately 7 hours when playing music at a moderate volume, while the Beats Pill+, which has an upgraded battery, can last up to 12 hours at a moderate volume.
If you are using your Beats Pill in a very noisy environment, or at high volumes, the battery life may deplete more quickly. Moreover, if you are using the speakerphone feature, battery life could be further reduced.
Generally, it is recommended to charge at least every 3-4 days in order to ensure optimal performance.
Is the Beats Pill waterproof?
No, the Beats Pill is not waterproof. It has an IPX4 splash-proof rating, which means it can withstand slight splashes, but it should not be submerged in water or fully exposed to heavy moisture. Be sure to keep it away from potentially wet environments like the pool or ocean and make sure to take it out if you’re in the rain.
Additionally, avoid contact with sweat, which can cause oxidation and affect the sound of the speakers.
Can you connect two Beats to the same phone?
Yes, it is possible to connect two Beats to the same phone. Depending on the type of Beats, you will need either Bluetooth or an audio cable to do so. For example, if you have Beats Solo3 Wireless headphones, you can connect them simultaneously to your phone using Bluetooth.
First, put your headphones into pairing mode by pressing and holding the power button for 5 seconds. Then, turn on your phone’s Bluetooth and select “Beats Solo3” from the list of available Bluetooth devices.
Your headphones will be connected.
If you have Beats Studio3 or Beats Pro headphones, you will need to use an audio cable to connect them both to your phone. Plug the audio cable into the headphone jack of your phone. From there, plug the two headphones into the two separate audio jacks on the audio cable.
Then just adjust your headphones to the perfect audio level.
It is also possible to connect two Beats to the same computer. For both Bluetooth and wired headphones, you just need to make sure that the headphone jack or Bluetooth connection is compatible with your computer.
Then follow the same steps as before and both headphones will be connected.
Does Beats Pill have subwoofer?
No, the Beats Pill does not have a subwoofer. The Beats Pill is a portable, wireless Bluetooth speaker that is designed primarily for playing back music, podcasts, audio books, and other audio content.
It is a lightweight speaker that offers up to 8 hours of playback on a single charge. It includes dual 1.5” tweeters and two full-range drivers for a full, balanced sound. It also has a 3.5mm audio jack for use with a variety of devices, and it has a built-in microphone for use with phones.
However, because the Beat Pill is not designed for playing back low frequencies and bass, it does not have a subwoofer and thus is not suitable for playing back bass heavy genres such as hip-hop, EDM, and others.
Can you track a Beats Pill speaker?
Tracking a Beats Pill speaker can be done in a few different ways, depending on the type and model of the speaker. With the Beats Pill + speaker, users can connect it to their smartphone or computer via Bluetooth and the Beats app, allowing them to locate it using GPS.
Other models of Beats Pill speakers may not have Bluetooth capabilities, but they could still be tracked if they have Near Field Communication (NFC) technology. In this case, users can use a NFC-enabled device to connect and locate the speaker.
Lastly, many Beats Pill speakers also have a built-in find lost feature, whereby activating it will cause the speaker to emit a loud sound, allowing it to be easily located.
How do I put my Beats Pill XL into pairing mode?
To put your Beats Pill XL into pairing mode, you will need to press and hold the power button for 3 seconds until the LED light flashes white. When in pairing mode, your Beats Pill XL will appear as a device on your Bluetooth-ready device so that you can select it to connect to.
Once the Beats Pill XL is connected to your device, the LED light will glow solid white. Note that if your Beats Pill XL has previously been connected to another device, you will need to forget the device in the Bluetooth connections list before attempting to pair again.
What are the buttons on the side of Beats Pill XL?
The Beats Pill XL has four main buttons on the side, which are used to adjust the volume, power on/off, change the track and to play/pause the music. To adjust the volume, press the top “+” and “-” buttons.
The middle “Play/Pause” button will pause the music when pressed once and resume the music when pressed again. To change the track, press and hold the “+” button to skip forward to the next track, or press and hold the “-” button to skip back to the previous track.
Finally, the bottom “B” button can be used to power on/off the Beats Pill XL but can also be used to connect to Bluetooth if it is pressed and held for three seconds.
Why was Beats Pill XL discontinued?
The Beats Pill XL was discontinued because it did not meet the safety standards required for its product category. In June 2015, Apple announced a voluntary recall of the product as a result of a potential fire hazard posed by the product’s lithium-ion battery.
The recall indicated that if the Beats Pill XL was charged using a higher power external source, the battery would overheat, posing a risk of damage to the user and of even causing a fire. Apple offered a full refund and an apology to customers, confirming the discontinuation of the product and the end of production.
It is unclear why safety standards weren’t met in this case, but Apple has since redesigned the product with a much safer battery.
What is a Beats Pill XL?
The Beats Pill XL is a wireless portable Bluetooth speaker developed by Beats Electronics, a subsidiary of Apple. It was designed for portability and ease of use, with a sleek and compact design. It has dual-directional audio with a total of 12 speakers offering 360-degree sound coverage.
It offers Bluetooth streaming from compatible devices, with a range of up to 33 feet, as well as support for NFC-pairing with compatible devices. It also has a 3.5mm headphone jack for private listening.
The Beats Pill XL is powered by an internal rechargeable lithium-ion battery offering up to 12 hours of continuous playback. It also has a built-in three-band equalizer and is compatible with the Beats app for more control when desired.
Made to be enjoyed on picnics, in the office, at home and all over, the Beats Pill XL is perfect for listening to music or podcasts, perfect for entertaining friends and family, and perfect for enjoying the sound you love whenever and wherever you go.
Can you adjust bass on Beats Pill?
Yes, you can adjust the bass on Beats Pill. This can be done by connecting the pill to an audio source, such as an iPhone or laptop, and then adjusting the bass settings in the sound preferences. This will allow you to customize the bass output of the Beats Pill.
Additionally, you can use the in-built Beats Pill+ app to access further custom settings. This app allows you to make different sound profiles, adjust the bass, treble, and mid-range tones, as well as select from various audio presets.
So, you can easily adjust the bass on your Beats Pill to get the sound you want.
Why is my Beats Pill not connecting to Bluetooth?
There could be a few different issues causing your Beats Pill not to connect to Bluetooth. First and foremost, check to ensure your device is actually Bluetooth-enabled. If it is, make sure the Bluetooth on your device is turned on, then put the Beats Pill in pairing mode by pressing and holding the power button for 5 seconds.
If the Beats Pill still won’t connect, try performing a ‘power reset’. To do this, press and hold the power button for 10 seconds while the device is plugged in, then unplug and plug it back in. If these steps don’t work, try connecting it to another Bluetooth-enabled device to test it.
If it still won’t connect, your Beats Pill could have a hardware malfunction. You can contact Beats customer service to help you determine the best course of action.
Where can I get my Beats Pill fixed?
Unfortunately, AppleCare no longer provides repair services for Beats products. However, there are still a few ways to get your Beats Pill repaired. You can either contact the Beats by Dre Support Team for more information on repair, go through a third-party repair shop, or try and find parts to repair the Beats Pill yourself.
If you choose to contact the Beats by Dre Support Team, you can do this via their website or by calling their toll-free number. You can find their contact information at the following link: https://www. beatsbydre.
beatsbydre. You may need to provide them with your Beats Pill serial number, and they will be able to provide you with instructions on how to proceed with your repair.
You can also contact a local third-party repair shop to see if they can assist you with repairs. The shop should be able to provide you with an estimate for repair costs and inform you if the repair is covered under any existing warranties.
If you are handy and have access to necessary parts, you may also be able to repair the Beats Pill yourself. You can access helpful repair tutorials through the Beats by Dre website, along with information about any potential costs for necessary parts.
No matter which path you decide to take, always use caution when dealing with electrical products and follow the manufacturer’s instructions carefully.
Does the Beats Pill turn off by itself?
Yes, the Beats Pill does turn off by itself. The device is equipped with an auto-off feature that turns the device off after 20 minutes of no audio or Bluetooth. You can also manually turn off the Beats Pill by pressing and holding the Bluetooth and + buttons simultaneously.
Additionally, if you pair the Beats Pill to your device via USB or Aux cable, it will turn off once you disconnect the cable.
Does the Beats Pill have to be plugged in to work?
No, the Beats Pill does not have to be plugged in to work. It is powered by a rechargeable battery, so it can be used cord-free for up to seven hours on a single charge. You can also connect the Beats Pill to any device that has Bluetooth, like a laptop, smartphone, or tablet.
If you want to play music from the Beats Pill without using a cord, you’ll need to make sure the device has enough battery power. You can charge it up with the included USB cable to get back up to full power when it’s running low.