Your contour box may be blinking for several reasons. The most common reason is due to your cable signal or broadcast signal being interrupted. This can happen if there is a significant amount of electrical interference in your area.
It can also happen if the power goes out or if the cable connection is loose. Another possible cause is if the software in your contour box has crashed due to an issue with the latest update. If this is the case, you may need to reset your contour box and restore its initial settings.
Else, if there are any settings changes that were made, you may need to reset your contour box and check that settings such as the TV output, HDMI settings and more are set correctly. It’s also possible that the contour box is short-circuiting, in which case you would need to check the cables and connections to your contour box.
How do I reset my contour box?
If you need to reset your Contour box, you can do so easily. First, start by unplugging the power cord and disconnecting all of the cables from the back of the device. Then, press and hold the power button for 10 seconds and release.
After that, plug the power cord back in and allow your Contour box to restart. Once it is back on, press and hold the power button again until you see the recovery screen. Follow the instructions on the screen to complete the reset process.
At the end of the reset process, your Contour box will be restored to the factory settings.
Why is my Cox Cable box flashing blue?
Your Cox Cable box could be flashing blue for a few different reasons. If it’s just a blue light, this is perfectly normal and means that the box is just booting up and establishing a connection to the network.
If your box is displaying a blue screen with a message or bulleted list such as “Updating System Software” or “Running Diagnostic Test”, it is downloading an update. This should only occur periodically and should finish in a few minutes.
If the blue screen remains on for a prolonged period of time, this usually indicates a problem. It could be because the box is not receiving data from the network such as if there is an outage or possibly a connection instability.
It could also indicate a problem with the box itself, possibly caused by a power surge or outage. If your box is still displaying blue after a few minutes, you should contact your Cox Cable provider for assistance.
How do I fix a blinking blue light on my router?
First, complete a power cycle of your router, which involves unplugging the power wire from the router, waiting one minute, and then plugging it back in. Once the router is powered up, the blue blinking light should be gone.
If the blue light continues to blink, you may need to perform a factory reset. To do this, use a paper clip, pencil eraser, or toothpick to press in the reset button on the back of your router for five to 10 seconds.
Once it’s done, the power light should turn green or blue, but not blink anymore. These two techniques should fix a blinking blue or any other colored light on your router. If this does not resolve your issue, then you may need to contact your router manufacturer for more technical support.
What color should the light on my Cox modem be?
The Cox modem should have a solid, steady blue light on the top. This indicates that your modem is connected to the Cox network. If you are having trouble connecting to WiFi, try pressing the Reset button on the back of your modem.
The light should turn off, and then after a few minutes, it should come back and be blue again. If the light is green, yellow, flashing, or off, this indicates that there is an issue connecting your modem to the Cox network.
In this situation you should contact your internet service provider.
How do I turn off the blue light on my Xfinity cable box?
To turn off the blue light on your Xfinity cable box, there are a few steps you need to take:
1. Make sure your cable box is powered on by pressing the ‘Cable’ button on your Xfinity remote.
2. Point your remote at the cable box and press the ‘On Demand’ button.
3. Press the ‘Settings’ button on the remote.
4. Scroll down to the ‘System’ section using the arrow keys on the remote.
5. Select the ‘Blue Light’ option.
6. Select the ‘Off’ option.
7. Select the ‘Done’ button to save your changes.
The blue light should now be turned off and you can resume watching your Xfinity cable programming. If the blue light is still on, try pressing the Reset button on the back of your cable box and then repeat the steps above to turn the blue light off.
What does blue blinking light on Cox mean?
If you have a Cox digital receiver, a blue blinking light on the front of the device typically indicates a software update is in progress. During this time, you won’t be able to access some functions, such as programming and On Demand, on your receiver.
The update can take up to 15 minutes, and it’s important that you don’t turn off or unplug your device until it’s finished. Additionally, if you have a DVR, the entire DVR system must be powered on, with all receivers connected to the same phone line.
If the blue light is still blinking after 15 minutes, you should unplug your device, wait 30 seconds, then plug it back in, as this should reset the update.
If the blue light is still blinking after resetting the update, you should contact Cox support for technical assistance.
How do I know if my Cox Internet is working?
In order to check if your Cox Internet is working, the first step is to power cycle your modem. To do this, unplug the power cable from your modem for about 10 seconds before plugging it back in. Then, wait for the modem to power back up and let it reconnect to the internet.
Once your modem is reconnected, you can try connecting a device directly to the modem to see if it can access the internet. If the connection is working, you should be able to access websites and use online services.
If direct connection still doesn’t work, it’s possible there is an issue with your internet service. You can contact Cox Customer Support for help troubleshooting the issue.
What does a white light mean on Cox modem?
A white light on a Cox modem typically indicates that your modem is connected to the network and that your internet service is in good working order. Depending on your device’s configuration, the white light could indicate one of several different statuses.
It may indicate that your modem is in the middle of a self-test, that the modem is actively receiving or transmitting data, or that the local device network is in standby mode. To identify what the white light means on your particular Cox modem, you should refer to the user manual that came with your modem or contact Cox customer service for more information.
How long do Cox contour boxes last?
Cox contour boxes typically last about 3-5 years, depending on usage and other factors such as weather and power surges. Many Cox Contour customers prefer to replace their box every 3 years as a precautionary measure, as continued use may lead to decreased performance over time due to internal components wearing out.
Cox recommends carrying out regular maintenance to keep your box running up to date, such as adjusting the cable signal levels, refreshing the software, and regularly cleaning the ports. Sticking to a regular maintenance schedule can help prolong the life of your Cox Contour box.