There could be several reasons why your iPhone won’t turn on. It might be due to a damaged battery or software issue. It could also be due to water or physical damage, such as a drop or fall.
If the device is physically damaged, the battery may be damaged, causing the device to not turn on. You may need to get a replacement battery or, in some cases, replace the entire device.
If the iPhone doesn’t turn on even with a fully charged battery, it could be due to a software issue. You may need to reset or restore the phone in order to restore it to working condition. To reset, press and hold the power button and the Home button at the same time until the Apple logo appears.
If the device still won’t turn on after resetting, the next step is to try to restore the device. To do this, connect it to a computer and open iTunes. If the device is recognized, you may be able to restore it.
Finally, if the issue is due to water or liquid damage, the device will not be able to be repaired.
How do you fix a phone that wont turn on or charge?
If your phone won’t turn on or charge, you should first check that the charger is properly plugged in and that the outlet is providing power. If the charger or outlet are not working, the phone will not receive power from either source.
Once you have verified that the charger and outlet are both functional, the next step is to check the charging port on the phone itself to ensure that it is not damaged or blocked. If the port appears to be functioning correctly and not blocked, then the issue could be related to the battery and you may need to replace it.
To do this, you will need to find and purchase a replacement battery that is compatible with your phone model. Once you have the new battery, you can either install it yourself or take it to a qualified technician for installation.
After the battery has been replaced, you should be able to turn on and use your phone normally.
Why is my phone not turning on at all?
If your phone is not turning on at all, it could be for several possible reasons. The most common reason for your phone not to turn on is if the battery has completely drained. To check if this is the issue, you can connect your phone to a charger and/or power source and see if the phone powers on.
If so, it likely means the battery was drained and a full charge will fix the issue.
If the phone does not power up after connecting it to a charger and/or power source, the issue could be related to a hardware malfunction or something caused by a software update. If this is the case, you may want to try a reset, either (a) by using the hardware reset buttons inside your phone, or (b) by doing a software reset of the device.
If neither of these methods work, you could consider taking the phone to a certified technician who can assess the hardware and take further troubleshooting steps.
How do you turn on a completely dead iPhone?
If your iPhone is completely dead, the first step is to connect it to a power source – either a wall outlet or one of Apple’s approved USB adapters – and begin charging the device. If the iPhone is able to charge, the display will eventually show an Apple logo and the device will turn on.
If your iPhone won’t turn on after being connected to a power source, it is possible the device’s battery is out of juice. If this is the case, your iPhone may need to be serviced and the battery may need to be replaced by a professional.
It is also possible that the charging port could be damaged, preventing the iPhone from receiving power. If this is the case, again, you will need to have the phone serviced by professional.
If you’ve tried all of the above and you’re still not able to turn on your iPhone, your device may have experienced power failure or a system failure. If this is the case, you will need to bring your iPhone in to the nearest Apple Store or an Apple Authorized Service Provider as soon as possible to have it serviced.
How do you know if your iPhone battery is damaged?
One way to tell if your iPhone battery is damaged is to check the battery health. The Battery Health feature on iOS 11 or later will present you with information regarding the capacity, temperature and number of charge cycles your battery has been through.
If the capacity section shows that your battery’s capacity is significantly degraded, it is likely that your battery is damaged and will need to be replaced.
Other signs of a damaged battery include your device’s battery becoming overly hot during use, draining too quickly or not holding a charge. If you experience any of these issues, it’s likely that your battery is damaged.
It is recommended that you take your iPhone to an Apple Store or Certified Apple Service Provider for a diagnostic test to determine the exact problem. They will be able to tell you for sure if your battery is damaged and advise you on the right course of action.
Why won’t my phone turn on after it died?
If your phone is not turning on after it died, the issue may be related to the battery or the power button. The battery could have died completely or the power button may have become unresponsive. If the battery is the issue, you can try to plug it into a power source to determine if the battery is indeed the issue.
If the battery is working but the phone still will not turn on, then the issue may be related to the power button. Since the power button may have become unresponsive, it may require a replacement in order to be fixed.
The good news is that there are a variety of ways to attempt to fix the phone, but it will likely require a professional to do it. For instance, you can try to reset the phone to factory settings, you can perform a hard reset, or you can try to replace the power button altogether.
It is important to remember that you should always consult with a professional or follow the instructions of the manufacturer before attempting any of these repair procedures.
Can an iPhone battery be revived?
Yes, it is possible to revive an iPhone battery. While an iPhone’s battery cannot be replaced with a new one, it can still be revived with a few useful tricks.
First, one might try toggling the device’s power switch off and on again. This can provide a quick boost when the battery is low and can help to reset the charging cycle.
Second, one should eliminate any additional processes running on the iPhone, such as apps, games, and connection to networks, that can be draining energy from the device. Turning off the device’s Wi-Fi and Bluetooth connections can also help to conserve energy.
Third, performing a “hard reset” can be helpful. This is done by holding down the home button and the power button simultaneously until the Apple logo appears.
Finally, if the methods mentioned above do not help to revive the iPhone battery, it might be necessary to take the phone to an Apple store where the battery can be inspected or replaced by an Apple technician.
What causes iPhone Black Screen of Death?
The iPhone Black Screen of Death (BSOD) is an error of iOS that occurs when the system fails to complete a specific task. It causes an iPhone to become completely unresponsive and display a black screen.
The Black Screen of Death can be caused by a variety of factors including hardware or software issues.
Hardware-related causes of the iPhone Black Screen of Death include faulty hardware components such as the display, logic board, and battery, as well as failing to perform a proper iPhone reset or update.
These hardware issues are largely the result of wear and tear over time, exposure to moisture or liquid, or physical damage.
Software-related causes of the Black Screen of Death on iPhone can result from failed software updates, corrupted files, or a jailbreak gone wrong. In some cases, a malware or adware infection can also be the culprit.
In any case, the only way to resolve these iOS errors is to reset the iPhone and reinstall the latest version of iOS. However, if the iPhone remains unresponsive, a trip to the Apple store may be necessary.
Why is my phone on my iPhone not working?
There could be a few reasons why your phone on your iPhone isn’t working. First, you should make sure that your cell phone provider has activated your number and that your SIM card is inserted correctly.
If that is all correct, then a few other possible causes could include a weak cellular connection, insufficient cellular coverage in the area, a problem with the phone’s antenna or hardware, or an issue with the phone’s software.
If the phone’s software is the issue, then you may need to restore the device to its factory settings or update the software to the latest version. If none of these solutions work, then you may need to contact your cell phone provider or visit an Apple store for further assistance.
Why won’t my iPhone charge after the battery drained completely?
There could be several reasons that your iPhone isn’t charging after the battery drained completely. The most common cause of this issue is a corrupted or drained battery. Other possible causes could include a faulty charging cable or charging adapter, faulty port, a software issue, or even dust or debris getting into the charging port.
If the battery has been completely drained, try hard resetting the phone. This can be done by pressing and holding the volume down and power buttons together for about 10 seconds, until the Apple logo appears.
If hard resetting the phone doesn’t work, try using a different cable and adapter, including other cables and adapters that are the correct specifications for your device. Additionally, make sure that your charging port is free of any debris or dust, and make sure durable covers or cases are not preventing your device from charging.
If all else fails, it’s potentially an issue with the battery or the motherboard, or other internal components in the iPhone. In this case, you may need to take it in to an Apple store or to an authorized repair shop to be serviced and assessed.
Why did my iPhone suddenly go black?
The most common cause is that your phone’s battery has run out of power and needs to be recharged. This can happen if you haven’t been using your phone very often or if you’ve been using it very heavily, draining the battery significantly.
It’s also possible your phone has crashed, which means the software has become corrupt and needs to be rebooted to regain normal function. This can happen after an app has been installed, upgraded or used heavily.
To reboot your iPhone, press and hold both the Sleep/Wake button and the Home button for at least 10 seconds.
Another possibility is that the LCD display has become disconnected from the wiring. Try and gently tap around the edges of the phone and see if the display comes back on again. If not, you may need to take it to an authorised Apple repair centre and have it repaired by a technician.