It is likely that only one of your Tzumi earbuds is working because there could be a few different issues at play. First, make sure that both earbuds are powered on and that the Bluetooth on your device is turned on.
If the earbuds are already powered on and the Bluetooth is turned on, then there could be a few other issues causing your earbuds to malfunction.
One potential issue is that one earbud might not be properly connected to the source device. Try disconnecting the earbuds from the source device and then reconnecting them, or if that doesn’t work, try a different Bluetooth source device such as a different smartphone or tablet.
Another possibility is that the volume on one of the earbuds might be set too low or muted. Make sure to check the volume levels on each earbud, and adjust them as needed so that both earbuds are playing audio.
Finally, if none of the above solutions work then it is possible that one of the earbuds is faulty and needs to be replaced. If you’ve had the earbuds for less than a year, then you should be able to receive a replacement from Tzumi.
Why my both earbuds are not working together?
It is possible that both of your earbuds are not working together because of wireless interference. Wireless interference can be caused by other devices in the same area. For example, if you are using Bluetooth headphones and other devices in the same space are also using Bluetooth, they may interfere with each other causing the two earbuds to not work together.
To fix this issue, try moving the devices further away from each other or turning them off, or switching your Bluetooth to a different frequency or band. It is also possible that the issue could be a malfunction in one of the earbuds.
Try replacing or repairing the earbuds if possible.
How do you activate both earbuds?
To activate both of your Bluetooth earbuds, you first need to pair them with your audio source of choice, whether it’s your smartphone, laptop, tablet, or other device. To do this, you need to place your earbuds into discoverable mode, usually by pressing the power button for several seconds.
Then, enable the discovery mode on your audio device and search for the earbuds. When your device finds them, select them to pair, and then follow the instructions to pair the earbuds with the device.
Once they have been paired, they should now be actively connected and ready to use.
If, for some reason, your earbuds are still not working or sound imbalanced, you should then check if your device is in the latest version of their software or firmware. You can do this by checking the manufacturer’s website for updates.
Once the updates have been installed, try connecting and pairing the earbuds again.
If all else fails, resetting the earbuds may be the next step. Depending on the device’s make and model, you may be able to do this by either pressing and holding the power button for 10 seconds or by pressing a specific combination of buttons.
With some devices, you may need to initiate a reset through the device’s settings.
After you have reset your earbuds, you should then be able to pair them with your device again, and both earbuds should now be active.
How do I fix one earbud has stopped working?
If one of your earbuds has stopped working, there are several steps you can take to try and fix the issue. First, make sure the earbud is actually malfunctioning and not just the sound quality. Try cleaning the earbud’s ports and contacts, using compressed air or a healing brush or compressed cotton swab.
If that doesn’t work, try disconnecting and reconnecting the earbud back to your device. In some cases, you may need to reset your Bluetooth connection. To do this on most devices, press and hold the connected Bluetooth device button until your device states that it has been disconnected.
Also, make sure the connected device is within a close range of the earbud. If none of these steps work, the earbud may need to be replaced. Many earbud manufacturers offer replacement warranties, so make sure to check with your manufacturer’s warranty guidelines.
How do you connect left and right earbuds?
Connecting the left and right earbuds depends on the type of earbuds you have. If they are true wireless earbuds, they will automatically connect to your device when they are removed from their case.
If they are wireless earbuds, they will need to be paired with your device via Bluetooth. To do this, you will turn on the Bluetooth setting on your device and select the earbuds from your available device list.
Once they are connected, you will then be able to hear audio through both earbuds.
How do I connect both AirPods at the same time?
In order to connect both of your AirPods at the same time, follow these steps:
1. Make sure that your AirPods are powered off.
2. Open the lid of the charging case.
3. Hold down the pairing button on the back of the case for about 15 seconds.
4. Release the button and the LED light on the front of the AirPods case should start flashing white.
5. Open your settings app on your iOS device.
6. Go to “Bluetooth” menu.
7. Tap on the AirPods in the list of devices.
8. Once the connection is established, the AirPods should start playing audio from the device they were paired with.
Why are my noise earbuds connecting separately?
If your noise earbuds are connecting separately, it could be due to several factors. It is likely a connection issue, as noise earbuds rely on a stable connection to both the audio source and each other.
Poor connection or interference can cause the earbuds to drop the signal or connect separately. To remedy this, you should make sure that the earbuds are charged, the Bluetooth radio is working properly, and that there is no interference from other Bluetooth signals.
If you are still having trouble, you may need to reset the Bluetooth connection. To do this, turn the Bluetooth on your device off and on again and then click the power switch on your earbuds for a few seconds.
This will force them to reconnect.
How do I reset my Tzumi sound mates no buttons?
If you need to reset your Tzumi Sound Mates and there are no buttons on the headset itself, you can try resetting the device using the following steps.
First, turn off the headset and remove it from the charging base. Then press and hold the power button for 8-10 seconds. You should see a white LED light come on for 1-2 seconds and then slowly turn off; this is an indication that the headset has been reset.
Once you’ve seen the white light turn off, place the headset back in the charging base, and it should now reset. If the reset fails, try to reset the headset again by repeating the steps above.
It’s important to note that this reset process will clear any audio settings you may have adjusted on the headset. This includes Bluetooth pairings, bass/treble controls, and other sound settings. If you’d like to make any adjustments to your sound, you’ll have to re-adjust the settings on the headset after the reset is complete.
How do you pair Tzumi earbuds to each other?
To pair Tzumi earbuds to each other, you will need to first turn on the Bluetooth on your device. To do this, open the Settings app and select Bluetooth. Make sure it is in the On position.
Then, open your charging case and hold down the center button for five seconds until the light indicator starts to blink in a rapid pattern. This means the earbuds are in pairing mode. When they are done connecting, the LED on the inside of the case will light up blue.
Once the earbuds are officially paired to each other, you should be able to see them in the Bluetooth menu on your device. From there, select the two earbuds from the menu. When the device is successful in pairing them, you will see them both as connected devices in the Bluetooth menu.
At this point, you are all set for audio playback. If you still experience issues connecting the earbuds, consult Tzumi’s customer service or try resetting your earbuds by pressing and holding the power button for 10 seconds.
Why wont my Tzumi Probuds connect?
First, make sure your device is compatible with the Tzumi Probuds. Second, make sure you are using the correct charging cable and it’s securely connected to the charging port. Third, check that the Bluetooth on your device is turned on and that you have tapped the “pair” button on the Tzumi Probuds.
Finally, if you are still having problems connecting, try resetting the Tzumi Probuds. To reset the Tzumi Probuds, press and hold both the ‘+’ and ‘-‘ buttons on both earbuds simultaneously while they are in the case.
After a few seconds, both LED lights will start to blink blue and it should now be reset and ready for pairing.
How do you get both Soundmates to work?
To get both Soundmates to work, you will need to make sure they are both powered on and connected to the same Bluetooth-enabled device, such as a laptop or smartphone. If they are both in the same room, they should pair up automatically.
If not, you can manually pair them by going into your Bluetooth device’s settings, selecting the Soundmate option, and then clicking the “Pair” button on both devices. Once the connection has been established, you can start playing audio from the device.
The audio will be simultaneously heard from both Soundmates. Additionally, make sure both devices are within a reasonable range of each other, as they may disconnect if they are too far apart.
How do you know when Tzumi sound mates are fully charged?
When your Tzumi Sound Mates are fully charged, you should see the indicator light change from red to white. Additionally, you should be able to listen to your music without any interruption or issue.
Once the device is fully charged, you should also be able to listen to your music for up to eight hours before it needs to be recharged. Ultimately, when your Tzumi Sound Mates are fully charged, you should see the indicator light turn from red to white and you should be able to listen to your music uninterrupted for up to 8 hours.
How do I contact Tzumi?
Tzumi provides several ways for customers to contact them. The easiest way is to email them at support@tzumi. com. Customers can also reach out to them through their website by filling out a contact form with their inquiry.
Additionally, customers can call Tzumi Customer Service at 1-800-564-6863 during business hours, Monday-Friday from 9am-5pm EST. Finally, customers who are on social media can reach out to Tzumi on Facebook and Twitter.
How do I sync my Tzumi headphones?
To sync your Tzumi headphones, you will need to connect them to your preferred device via Bluetooth. To do this, start by turning on your Tzumi headphones by pressing the power button located on the right ear cup.
You will then need to make sure that your Tzumi headphones are in pairing mode by pressing and releasing the power button again. Your headphones will now enter pairing mode, indicated by the status LED blinking in blue.
Once in pairing mode, the next step is to locate the device you want to connect to the headphones. Go to the Bluetooth settings of your preferred device (phone, laptop, etc. ), and search for your available Bluetooth devices.
Locate the Tzumi headphones in the list, select them, and click Connect. Your headphones will now be securely connected.
Finally, to verify that the connection was successful, turn the volume up on both devices, and you should hear audio from your Tzumi headphones.
How do I connect my Soundmates v2 to my Iphone?
Connecting your Soundmates v2 to your iPhone is easy and will only take you a few minutes. First, ensure that your Soundmates v2 headphones are powered on and discoverable. Then, open the Settings app on your iPhone and select Bluetooth.
You should see Soundmates v2 in the list of available devices. Tap on it to initiate pairing. Depending on your iPhone model, you may be prompted to enter a Bluetooth pairing code- either 0000 or 1234 are the defaults.
Upon successful pairing, you’ll see a checkmark next to Soundmates v2 in the Bluetooth menu. Now you’re ready to enjoy your music or videos with Soundmates v2!.